Previous Topic
Chart Properties
This topic describes the properties of a Chart object.
Designer provides some properties only when you use the object in certain report types. You can get details from the Available For column in the property table.
| Property Name | Available For | Description |
|---|---|---|
| General | ||
| Class Type | Query Page Report | Shows the class type of the object. Read only. |
| Data Inherit | Page Report, Web Report, Library Component | Shows whether the object inherits dataset from another object. Read only. |
| Dataset | Query Page Report | Shows the dataset the object applies. Read only. |
| Instance Name | Query Page Report | Shows the instance name of the object. Read only. |
| Geometry | ||
| Height | Page Report, Web Report, Library Component | Specifies the height of the object. Type a numeric value to change the height. Data type: Float |
| Width | Page Report, Web Report, Library Component | Specifies the width of the object. Type a numeric value to change the width. Data type: Float |
| X | Page Report, Web Report, Library Component | Specifies the horizontal coordinate of the object's top left corner, relative to its parent container, when the object is not in static position in the container. Type a numeric value to change the coordinate.
Data type: Float |
| Y | Page Report, Web Report, Library Component | Specifies the vertical coordinate of the object's top left corner, relative to its parent container, when the object is not in static position in the container. Type a numeric value to change the coordinate.
Data type: Float |
| CSS | ||
| Class | Page Report, Web Report, Library Component | Specifies the name of the Class Selector to apply to the object, which you define in the CSS file of the style the report applies.
For example, if you define the CSS file as follows:
To apply the Class Selector in the file to the object, type C in the value cell. Data type: String |
| Style | Page Report, Web Report, Library Component | Specifies the style you want to apply to the object. You can specify the style in two ways:
Data type: String |
| Others | ||
| Alternate Text | Page Report, Web Report, Library Component | Specifies the text you want to show when the chart cannot display in the HTML output, if you export the chart to HTML as an image chart. Data type: String |
| Auto Scale in Number | Page Report, Web Report, Library Component | Specifies whether to automatically scale the Number values in the object that fall into the two ranges:
Data type: Boolean |
| Cache | Query Page Report | Specifies whether to cache the dataset for this object in the data buffer, so that other objects using the same dataset can share the data rather than perform their own SQL query.
Data type: Boolean |
| Default for Filter | Page Report, Web Report | Specifies whether to display the object as the default data component in the Apply To drop-down list of the Filter dialog box at runtime.
Data type: Boolean
|
| Export to Excel | Page Report, Web Report, Library Component | Specifies whether to include the object in the Excel output.
Data type: Boolean |
| Export to HTML | Page Report, Web Report, Library Component | Specifies whether to include the object in the HTML output.
Data type: Boolean |
| Export to PDF | Page Report, Web Report, Library Component | Specifies whether to include the object in the PDF output.
Data type: Boolean |
| Export to PostScript | Page Report, Web Report, Library Component | Specifies whether to include the object in the PostScript output.
Data type: Boolean |
| Export to Report Result | Page Report, Web Report, Library Component | Specifies whether to include the object when you preview the report in the Page Report Result format for a page report or Web Report Result for a web report in Designer, and when users run the report in the same format or use the library component at runtime.
Data type: Boolean |
| Export to RTF | Page Report, Web Report, Library Component | Specifies whether to include the object in the RTF output.
Data type: Boolean |
| Go to Detail | Query Page Report | Designer displays this property when the object is in the group header/footer panel of a banded object. You can use it to specify whether to show the detail information about the group when users select the object in Page Report Studio. See Obtaining the Group Details in a Banded Object.
Data type: Boolean |
| Invisible | Page Report, Web Report, Library Component | Specifies whether to hide the object in the design area and in the report. Logi Report Engine performs all calculations that involve the object regardless of whether the object is visible or not. Data type: Boolean |
| Invisible for Filter Dialogs | Page Report, Web Report | Specifies whether to display the object in the Apply To drop-down list of the Filter dialog box at runtime. Designer disables this property when you set Default for Filter of the object to "true".
Data type: Boolean |
| Logic Column | Page Report, Web Report, Library Component | Designer displays this property when the object is in a table. You can use it to specify whether to show the object in the next visible table cell in the same row when the column that holds the object is hidden. Choose an option from the drop-down list.
Data type: Enumeration
|
| Position | Page Report, Web Report, Library Component | Designer enables this property when the object is in a flow layout container, such as the report body or a tabular cell, text box, or KPI. You can use it to specify the position of the object in the container. Choose an option from the drop-down list. Data type: Enumeration |
| Suppress | Page Report, Web Report, Library Component | Specifies whether to suppress the object in the design area and in the report. If you suppress an object, Logi Report Engine skips all formulas and calculations that involve the object. This property has higher priority over Invisible. Data type: Boolean |
| Suppress When No Records | Page Report, Web Report, Library Component | Specifies whether to suppress the object in the report when no record is returned to its parent data component.
Data type: Boolean |
| Excel | ||
| Column Index | Page Report, Web Report | Specifies the X coordinate of the object relative to its parent container in the Excel output, measured in cells. Data type: Integer
|
| Column Number | Page Report, Web Report | Specifies the number of columns to determine the width of the object in the Excel output. Type an integer value to change the number. Data type: Integer
|
| Row Index | Page Report, Web Report | Specifies the Y coordinate of the object relative to its parent container in the Excel output, measured in cells. Data type: Integer
|
| Row Number | Page Report, Web Report | Specifies the number of rows to determine the height of the object in the Excel output. Type an integer value to change the number. Data type: Integer
|
| TOC | ||
| Anchor Display Value | Page Report, Web Report | Specifies the text you want to display as the object's TOC entry label, when you set the object's TOC Anchor property to "true". Data type: String |
| TOC Anchor | Page Report, Web Report | Specifies whether to include the object in the TOC of the report. Data type: Boolean |
| Platform (not available to organization chart) | ||
| Anti-aliasing | Page Report, Web Report, Library Component | Specifies whether to smooth out edges of the chart. Data type: Boolean |
| Minimum Tick Mark Space | Page Report, Web Report, Library Component | Specifies the minimum space between two adjacent tick marks on the category axis of the chart. Type a numeric value to change the space.
Data type: Float |
| Pattern List | Page Report, Web Report, Library Component | Specifies the color pattern of the data markers in the same data series in the chart. Select  in the value cell to edit the pattern in the Color List dialog box.
Data type: String
|
| Show Legend | Page Report, Web Report, Library Component | Specifies whether to display the chart legend.
Data type: Boolean |
| Designer displays the following platform properties for a heat map, and they take effect when the heat map has only a summary as the color-by field. | ||
| Color When Null | Page Report, Web Report, Library Component | Specifies the color you want to apply to the null value in the heat map. Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color. Data Type: String |
| Color When Zero | Page Report, Web Report, Library Component | Specifies the color you want to apply to the zero value in the heat map. Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color. Data Type: String
|
| End Color | Page Report, Web Report, Library Component | Specifies the ending color of the gradient you want to apply to the heat map. Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color. Data type: String |
| Reverse | Page Report, Web Report, Library Component | Specifies whether to reverse the starting color and ending color of the gradient you specify for the heat map. Data type: Boolean |
| Start Color | Page Report, Web Report, Library Component | Specifies the starting color of the gradient you want to apply to the heat map. Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color. Data type: String |
| Using Color When Zero | Page Report, Web Report, Library Component | Specifies whether to apply the color you specify via Color When Zero to the zero value in the heat map. When you set this property to "true", if the minimum value in the heat map is less than 0, the gradient starts from the starting color to the zero value color, and then from the zero value color to the ending color.
Data type: Boolean |
| Background (for customizing fill pattern of the platform) | ||
| Border Color | Page Report, Web Report, Library Component | Specifies the color for the border of the element. Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color. Data type: String |
| Border End Caps | Page Report, Web Report, Library Component | Specifies the ending style for the border of the element. Choose an option from the drop-down list.
Data type: Enumeration |
| Border Joint | Page Report, Web Report, Library Component | Specifies the joint style for the border of the element. Choose an option from the drop-down list.
Data type: Enumeration |
| Border Outlined | Page Report, Web Report, Library Component | Specifies whether to use outline path for the border of the element. Default is to apply fill path.
Data type: Boolean |
| Border Style | Page Report, Web Report, Library Component | Specifies the line style for the border of the element. Choose an option from the drop-down list.
Data type: Enumeration |
| Border Thickness | Page Report, Web Report, Library Component | Specifies the width for the border of the element. Type a numeric value to change the thickness.
Data type: Float |
| Border Transparency | Page Report, Web Report, Library Component | Specifies the transparency for the border of the element, in percent. Type a numeric value to change the transparency.
Data type: Integer |
| Border Type | Page Report, Web Report, Library Component | Specifies the type for the border of the element.
Data type: Enumeration |
| Border Variable Dash | Page Report, Web Report, Library Component | Specifies whether to resize the dash automatically when you select a dash line style for Border Style. Default is to apply fixed dash size. Data type: Boolean |
| Color | Page Report, Web Report, Library Component | Specifies the color to fill the element, when you set Fill Type of the element to "color". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color. Data type: String |
| Fill Transparency | Page Report, Web Report, Library Component | Specifies the transparency for the fill pattern of the element, in percent. Type a numeric value to change the transparency.
Data type: Integer |
| Fill Type | Page Report, Web Report, Library Component | Specifies how you want to fill the element, by color, texture, gradient, or image, or not to fill it. Choose an option from the drop-down list.
Data type: Enumeration |
| Gradient End Color | Page Report, Web Report, Library Component | Specifies the ending color of the gradient, when you set Fill Type of the element to "gradient". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color. Data type: String |
| Gradient End X | Page Report, Web Report, Library Component | Specifies the horizontal position where the gradient ends when you set Fill Type of the element to "gradient", measured in a percentage of the element's width or the width of the inset in the element if you define an inset, from the left edge of the element or inset.
Data type: Integer |
| Gradient End Y | Page Report, Web Report, Library Component | Specifies the vertical position where the gradient ends when you set Fill Type of the element to "gradient", measured in a percentage of the element's height or the height of the inset in the element if you define an inset, from the bottom edge of the element or inset.
Data type: Integer |
| Gradient Start Color | Page Report, Web Report, Library Component | Specifies the starting color of the gradient, when you set Fill Type of the element to "gradient". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color. Data type: String |
| Gradient Start X | Page Report, Web Report, Library Component | Specifies the horizontal position where the gradient begins when you set Fill Type of the element to "gradient", measured in a percentage of the element's width or the width of the inset in the element if you define an inset, from the left edge of the element or inset.
Data type: Integer |
| Gradient Start Y | Page Report, Web Report, Library Component | Specifies the vertical position where the gradient begins when you set Fill Type of the element to "gradient", measured in a percentage of the element's height or the height of the inset in the element if you define an inset, from the bottom edge of the element or inset.
Data type: Integer |
| Gradient Style | Page Report, Web Report, Library Component | Specifies the style of the gradient to fill the element, when you set Fill Type of the element to "gradient". Choose an option from the drop-down list.
Data type: Enumeration |
| Image File | Page Report, Web Report, Library Component | Specifies the file name of the image, a portion of which you want to use to fill the element, when you set Fill Type of the element to "image". Type the file name with suffix in the value cell. If the image is outside the current catalog, you should include the full path of the image correctly.
Data type: String |
| Image Height | Page Report, Web Report, Library Component | You can use the four properties, Image Height, Image Width, Image X, and Image Y, to define a portion of an image (the portion is a rectangle) to fill the element, when you set Fill Type of the element to "image".
Image Height specifies the height of the portion, measured in a percentage of the image's height. Data type: Integer |
| Image Layout | Page Report, Web Report, Library Component | Specifies the layout of the image portion to fill the element, when you set Fill Type of the element to "image". Choose an option from the drop-down list.
Data type: Enumeration |
| Image Width | Page Report, Web Report, Library Component | You can use the four properties, Image Height, Image Width, Image X, and Image Y, to define a portion of an image (the portion is a rectangle) to fill the element, when you set Fill Type of the element to "image".
Image Width specifies the width of the portion, measured in a percentage of the image's width. Data type: Integer |
| Image X | Page Report, Web Report, Library Component | You can use the four properties, Image Height, Image Width, Image X, and Image Y, to define a portion of an image (the portion is a rectangle) to fill the element, when you set Fill Type of the element to "image".
Image X specifies the left position of the portion, measured in a percentage of the image's width, from the left edge of the image. Data type: Integer |
| Image Y | Page Report, Web Report, Library Component | You can use the four properties, Image Height, Image Width, Image X, and Image Y, to define a portion of an image (the portion is a rectangle) to fill the element, when you set Fill Type of the element to "image".
Image Y specifies the top position of the portion, measured in a percentage of the image's height, from the bottom edge of the image. Data type: Integer |
| Inset Bottom | Page Report, Web Report, Library Component | You can use the four properties, Inset Bottom, Inset Left, Inset Right, and Inset Top, to define an inset in the element and fill the inset instead of the entire element.
Inset Bottom specifies the bottom position of the inset, measured in a percentage of the element's height, from the bottom edge of the element. Data type: Float |
| Inset Left | Page Report, Web Report, Library Component | You can use the four properties, Inset Bottom, Inset Left, Inset Right, and Inset Top, to define an inset in the element and fill the inset instead of the entire element.
Inset Left specifies the left position of the inset, measured in a percentage of the element's width, from the left edge of the element. Data type: Float |
| Inset Right | Page Report, Web Report, Library Component | You can use the four properties, Inset Bottom, Inset Left, Inset Right, and Inset Top, to define an inset in the element and fill the inset instead of the entire element.
Inset Right specifies the right position of the inset, measured in a percentage of the element's width, from the right edge of the element. Data type: Float |
| Inset Top | Page Report, Web Report, Library Component | You can use the four properties, Inset Bottom, Inset Left, Inset Right, and Inset Top, to define an inset in the element and fill the inset instead of the entire element.
Inset Top specifies the top position of the inset, measured in a percentage of the element's height, from the top edge of the element. Data type: Float |
| Radius | Page Report, Web Report, Library Component | Specifies the radius for the joint of the platform border, when you set Border Joint to "joint round". Type a numeric value to change the radius.
Data type: Float |
| Texture Background Color | Page Report, Web Report, Library Component | Specifies the background color of the texture, when you set Fill Type of the element to "texture". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color. Data type: String |
| Texture Foreground Color | Page Report, Web Report, Library Component | Specifies the foreground color of the texture, when you set Fill Type of the element to "texture". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color. Data type: String |
| Texture Style | Page Report, Web Report, Library Component | Specifies the style of the texture to fill the element, when you set Fill Type of the element to "texture". Choose an option from the drop-down list.
Data type: Enumeration |
| Data (not available to organization chart) | ||
| For heat map | ||
| Color by Logarithm | Page Report, Web Report, Library Component | Specifies whether to calculate the color-by summary based on logarithm function. Choose an option from the drop-down list:
Data type: String |
| Size by Logarithm | Page Report, Web Report, Library Component | Specifies whether to calculate the size-by summary based on logarithm function. Choose an option from the drop-down list:
Data type: String |
| For other chart types | ||
| Category Data Mapping File | Page Report, Web Report, Library Component | Specifies the data mapping file (without the locale part) you want to apply to the category values of the chart for NLS use. For example, if the data mapping file is Product_de_DE.properties, type Product in the value cell. Data type: String |
| Category End Offset | Page Report, Web Report, Library Component | Specifies the end offset of the category values.
Data type: Integer |
| Category Format | Page Report, Web Report, Library Component | Specifies the data format in which you want to display labels on the category axis of the chart. Select in the value cell to specify the format in the Data Format dialog box.
Data type: String |
| Category Range Data Mapping File | Page Report, Web Report, Library Component | Specifies the data mapping file you want to apply to the special group values that display in the range of the category axis in the chart for NLS use. For example, if the data mapping file name is Product_de_DE.properties, type Product (without the locale part) in the value cell.
Data type: String |
| Category Start Offset | Page Report, Web Report, Library Component | Specifies the start offset of the category values. Data type: Integer |
| Category Value Encoding | Page Report, Web Report, Library Component | Specifies the encoding format for the category values. Choose an option from the drop-down list.
Data type: String |
| Hint Percent Format | Page Report, Web Report, Library Component | Specifies the format for percent values in the static data labels and in the data marker hint of the chart. Select in the value cell to specify the format in the Data Format dialog box.
Data type: String |
| Hint Value Format | Page Report, Web Report, Library Component | Specifies the format for values in the static data labels and in the data marker hint of the chart. Select in the value cell to specify the format in the Data Format dialog box.
Data type: String |
| Hyperlink | Query Page Report, Web Report, Library Component | Specifies the hyperlink that refers to another report or a website you want to add to data markers of the chart. Type the URL of the report or website in the value cell.
Data type: String |
| Hyperlink Target | Query Page Report, Web Report, Library Component | Specifies the target window or frame to display the content that you define via the Hyperlink property. Choose an option from the drop-down list.
Data type: String |
| Motion Bar Format | Page Report, Web Report, Library Component | Specifies the data format in which you want to display the motion field values on the motion bar. Select in the value cell to specify the format in the Data Format dialog box. Data type: String |
| Overall Series | Page Report, Web Report, Library Component | Specifies whether to calculate the top or bottom N categories based on series.
Data type: Boolean
|
| Primary Data Format | Page Report, Web Report, Library Component | Specifies the data format in which you want to display labels on the primary value axis (the Y axis) of the chart. Select in the value cell to specify the format in the Data Format dialog box.
Data type: String |
| Reverse Category | Page Report, Web Report, Library Component | Specifies whether to reverse the sequence of the categories in the chart.
Data type: Boolean |
| Reverse Series | Page Report, Web Report, Library Component | Specifies whether to reverse the sequence of the data series in the chart.
Data type: Boolean
|
| Secondary Data Format | Page Report, Web Report, Library Component | Specifies the data format in which you want to display labels on the secondary value axis (the Y2 axis) of the combo chart. Select in the value cell to specify the format in the Data Format dialog box.
Data type: String |
| Series Data Mapping File | Page Report, Web Report, Library Component | Specifies the data mapping file (without the locale part) you want to apply to the series values of the chart for NLS use. For example, if the data mapping file is Product_de_DE.properties, type Product in the value cell. Data type: String
|
| Series End Offset | Page Report, Web Report, Library Component | Specifies the end offset of the series values.
Data type: Integer
|
| Series Format | Page Report, Web Report, Library Component | Specifies the data format in which you want to display labels on the series axis of the chart. Select in the value cell to specify the format in the Data Format dialog box.
Data type: String
|
| Series Start Offset | Page Report, Web Report, Library Component | Specifies the start offset of the series values.
Data type: Integer
|
| Series Value Encoding | Page Report, Web Report, Library Component | Specifies the encoding format for the series values. Choose an option from the drop-down list.
Data type: String
|
| Sort Category | Page Report, Web Report, Library Component | Specifies the order of the categories in the chart. Choose an option from the drop-down list.
Data type: Enumeration |
| Sort Series | Page Report, Web Report, Library Component | Specifies the order of the data series in the chart. Choose an option from the drop-down list.
Data type: Enumeration
|
| Swap Groups | Page Report, Web Report, Library Component | Specifies whether to swap groups of the chart. When you set this property to "true":
Data type: Boolean
|
| X Hyperlink | Query Page Report, Web Report, Library Component | Specifies the hyperlink that refers to another report or a website you want to add to the category axis labels of the chart. Type the URL of the report or website in the value cell.
Data type: String |
| X Hyperlink Target | Query Page Report, Web Report, Library Component | Specifies the target window or frame to display the content that you define via the X Hyperlink property. Choose an option from the drop-down list. Data type: String |
| Z Hyperlink | Query Page Report, Web Report, Library Component | Specifies the hyperlink that refers to another report or a website you want to add to the series axis labels of the chart. Type the URL of the report or website in the value cell.
Data type: String |
| Z Hyperlink Target | Query Page Report, Web Report, Library Component | Specifies the target window or frame to display the content that you define via the Z Hyperlink property. Choose an option from the drop-down list.
Data type: String |
| Accessibility | ||
| External CSS Class Selector | Query Page Report | Specifies the name of the Class Selector for the object in the HTML output. Data type: String |
| External ID | Query Page Report | This property is mapped to the HTML attribute id, as specified by w3.org. Data type: String |
| External Title | Query Page Report | This property is mapped to the HTML attribute title, as specified by w3.org. Data type: String |
| LongDesc | Query Page Report | This property is mapped to the HTML attribute longdesc, as specified by w3.org. Data type: String |
Hyperlink, X Hyperlink, Z Hyperlink
You can use these properties to add a hyperlink that refers to another report or a website, to the chart data markers and labels on the category and series axes. For chart in a page report, you can also control the hyperlink with a formula, which is a good way to get data from another report.
For example, you have two reports, ReportA and ReportB, in the SampleReports.cat catalog. In ReportA, you group the data in a banded object by customer country and use a bar chart to display the count of Customer_ID in every group. ReportB shows the information of customer, such as ID, Name, and Annual Sales. Then you want to build a link between the two reports to get this result at runtime: run ReportA and select the bar of a country, then ReportB displays showing the data of the specific country only. To achieve the goal, take these steps:
- In Designer, open ReportA.cls.
- Create a formula, Link_b. For example:
string t="http://localhost:8888/jinfonet/tryView.jsp?&jrs.report=ReportB.cls&jrs.catalog=%2fSampleReports%2fSampleReports.cat&jrs.result_type=8&jrs.authorization=YWRtaW46YWRtaW4%3D&";
string t1="jrs.param$PCOUNTRY=";
string url=t+t1+"@INNER"+"&jrs.result_type=1";
return urlThe following are some tips for you when creating the formula to control the hyperlink properties:
- You need to make sure that the paths of the catalog and the report in the URL correspond with their paths on Server. For more information about how to create the URL, see Running Reports via URL in the Logi Report Server Guide.
- You can use the built-in parameter INNER to represent the category values, and OUTER for series values.
- When you want to use the formula to control the X HyperLink and Z HyperLink properties, you can use @XDIM and @ZDIM respectively instead of @INNER and @OUTER.
- In the Report Inspector, set Hyperlink of the chart object to Link_b.
- Select the target window or frame to display the linked report from the value drop-down list of the Hyperlink Target property.
- <Server Setting>
Select to load the linked content according to setting on Server: for page report, it is specified by the Pop Up New Window for Links option in the Profile > Configure Profile > Page Report Studio > Properties > Default tab; for web report and library component, by the Target of Detail Table Report and Links option in the Profile > Configure Profile > Web Report Studio > Properties tab. - New Window
Select to load the linked content into a new window. The window is not named. - Whole Window
Select to load the linked content into the full browser window. - Same Frame
Select to load the linked content into the same frame as the link. - Parent Frame
Select to load the linked content into the parent frame of the frame that contains the link. - Other Frame
Select to load the linked content into some other specified frame. Type the name of the frame you have defined in the value cell. If the frame name does not exist, Server loads the linked content into a new window.
- <Server Setting>
- Publish the two reports with the catalog to Server.
- Run ReportA in Page Report Studio.
- Point to a bar and select it. ReportB displays showing data of the specified country.
- View the information of the other countries by selecting the corresponding bars in ReportA.
- After setting the Hyperlink, X Hyperlink, or Z Hyperlink property for a chart, if you also add another link to the data markers, the category axis, or series axis of the chart using the Link feature, the link has higher priority over the hyperlink on the same chart element.
- Users can select the chart elements to open the specified hyperlinks at runtime only when you do not edit the default Click Priority setting of the report (the link action has the highest priority by default).
Category Start Offset, Category End Offset, Series Start Offset, and Series End Offset.
You can use the four properties to control the range of data you want to display in a chart. For example, when a chart has 12 categories (the category field of the chart contains 12 values), you can set Category Start Offset to 3 and Category End Offset to 8 to display the categories on the X axis from the third category to the eighth.
The range of the property values can be an integer between 0 and (number of the categories/series – 1). When the value you specify is out of this range, Designer applies the following rules:
| If | Then |
|---|---|
| Start Offset < 0 | Start Offset = 0 |
| Start Offset > maximum data number | Start Offset = maximum data number |
| End Offset < 0 | End Offset = maximum data number |
| End Offset > maximum data number | End Offset = maximum data number |
| Start Offset > End Offset and End Offset >=0 | Start Offset = 0, End Offset = maximum data number |
- If you set the value to be less than 0, Designer displays the categories or series without any offset.
- If you set the values to be greater than 0 and the value of Category/Series Start Offset is greater than that of Category/Series End Offset, Designer displays all categories or series.