Skip to main content

Chart Label Properties

  • Updated

BackPrevious Topic  Next TopicNext

Chart Label Properties

This topic describes the properties of a Chart Label object.

Designer provides some properties only when you use the object in certain report types. You can get details from the Available For column in the property table.

Property NameAvailable ForDescription
General
Class TypeQuery Page ReportShows the class type of the object. Read only.
Data InheritQuery Page ReportShows whether the object inherits dataset from another object. Read only.
DatasetQuery Page ReportShows the dataset the object applies. Read only.
Instance Name Query Page ReportShows the instance name of the object. Read only.
Geometry
HeightPage Report, Web Report, Library ComponentSpecifies the height of the object. Type a numeric value to change the height.

Data type: Float

WidthPage Report, Web Report, Library ComponentSpecifies the width of the object. Type a numeric value to change the width.

Data type: Float

XPage Report, Web Report, Library ComponentSpecifies the horizontal coordinate of the object's top left corner, relative to its parent container. Type a numeric value to change the coordinate.

Data type: Float

YPage Report, Web Report, Library ComponentSpecifies the vertical coordinate of the object's top left corner, relative to its parent container. Type a numeric value to change the coordinate.

Data type: Float

CSS
ClassPage Report, Web Report, Library ComponentSpecifies the name of the Class Selector to apply to the object, which you define in the CSS file of the style the report applies.

For example, if you define the CSS file as follows:

@charset "GBK";
TextField {Background: #ff0000}
/*Style=LabelX*/
TextField[Style="LabelX"]{Background: #0000FF}
/*ID=W*/
TextField#W{Background: #FFFF00}
/*class=C*/
TextField.C{Background: #00FFFF}

To apply the Class Selector in the file to the object, type C in the value cell.

Data type: String

StylePage Report, Web Report, Library ComponentSpecifies the style you want to apply to the object. You can specify the style in two ways:
  • Type the style which should be an Attribute Selector whose attribute is "style" in the CSS file of the style the report applies. For example, to apply the style in the preceding sample CSS file to the object, type LabelX in the value cell.
  • Choose a style from the drop-down list when you have specified the Style Group property for the report tab or web report, and there are styles in the style group that are applicable to the object.

Data type: String

Accessibility
External CSS Class SelectorQuery Page ReportSpecifies the name of the Class Selector for the object in the HTML output.

Data type: String

Label (for customizing the text in the chart label)
Bottom MarginPage Report, Web Report, Library ComponentSpecifies the distance between the text and the bottom border of the label, based on the alignment of the text. Type a numeric value to change the margin.

Data type: Float

ColorPage Report, Web Report, Library ComponentSpecifies the color to fill the element, when you set Fill Type of the element to "color". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Fill TransparencyPage Report, Web Report, Library ComponentSpecifies the transparency for the fill pattern of the element, in percent. Type a numeric value to change the transparency.

Data type: Integer

Fill TypePage Report, Web Report, Library ComponentSpecifies how you want to fill the element, by color, texture, or gradient, or not to fill it. Choose an option from the drop-down list.

Data type: Enumeration

Font EffectPage Report, Web Report, Library ComponentSpecifies the special effect of the label text. Choose an option from the drop-down list.
  • none
    Select if you do not want to apply any special effect to the text.
  • embossed
    Select to make the text appear to be raised off the page in relief.
  • engraved
    Select to make the text appear to be imprinted or pressed into the page.
  • shadowed
    Select to add a shadow beneath and to the right of the text.
  • outlined
    Select to display the exterior border around each character of the text.
  • shadowed & outlined
    Select to add a shadow beneath and to the right of the text and display the exterior border around each character.

Data type: Enumeration

Font FacePage Report, Web Report, Library ComponentSpecifies the font face of the label text. Choose an option from the drop-down list.

Data type: Enumeration

Font RotationPage Report, Web Report, Library ComponentSpecifies the rotation angle of the label text around its center, in degrees. Type a numeric value to change the rotation.

Data type: Float

Font ScriptPage Report, Web Report, Library ComponentSpecifies to apply superscript or subscript formatting to the label text, or neither of them. Choose an option from the drop-down list.

Data type: Enumeration

Font ShearingPage Report, Web Report, Library ComponentSpecifies the shearing transformation of the label text around its center. Type a numeric value to change the shearing.

Data type: Float

Font SizePage Report, Web Report, Library ComponentSpecifies the font size of the label text. Type an integer value to change the size.

Data type: Integer

Font StrikethroughPage Report, Web Report, Library ComponentSpecifies the style of the line to draw through the label text. Choose an option from the drop-down list.

Data type: Enumeration

Font StylePage Report, Web Report, Library ComponentSpecifies the font style of the label text. Choose an option from the drop-down list.

Data type: Enumeration

Font UnderlinePage Report, Web Report, Library ComponentSpecifies the style of the horizontal line under the label text. Choose an option from the drop-down list. "patterned line" or "bold patterned" draws a line or bold line in the pattern of the text.

Data type: Enumeration

Critical icon Web Report Studio and JDashboard do not support underlining chart text so this property will be ignored when the chart runs in Web Report Studio or is used in a dashboard.

Gradient End ColorPage Report, Web Report, Library ComponentSpecifies the ending color of the gradient, when you set Fill Type of the element to "gradient". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Gradient End XPage Report, Web Report, Library ComponentSpecifies the horizontal position where the gradient ends when you set Fill Type of the element to "gradient", measured in a percentage of the element's width, from the left edge of the element.

Data type: Integer

Gradient End YPage Report, Web Report, Library ComponentSpecifies the vertical position where the gradient ends when you set Fill Type of the element to "gradient", measured in a percentage of the element's height, from the bottom edge of the element.

Data type: Integer

Gradient Start ColorPage Report, Web Report, Library ComponentSpecifies the starting color of the gradient, when you set Fill Type of the element to "gradient". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Gradient Start XPage Report, Web Report, Library ComponentSpecifies the horizontal position where the gradient begins when you set Fill Type of the element to "gradient", measured in a percentage of the element's width, from the left edge of the element.

Data type: Integer

Gradient Start YPage Report, Web Report, Library ComponentSpecifies the vertical position where the gradient begins when you set Fill Type of the element to "gradient", measured in a percentage of the element's height, from the bottom edge of the element.

Data type: Integer

Gradient StylePage Report, Web Report, Library ComponentSpecifies the style of the gradient to fill the element, when you set Fill Type of the element to "gradient". Choose an option from the drop-down list.

Data type: Enumeration

Left MarginPage Report, Web Report, Library ComponentSpecifies the distance between the text and the left border of the label, based on the alignment of the text. Type a numeric value to change the margin.

Data type: Float

Outline ColorPage Report, Web Report, Library ComponentSpecifies the color of the text outline, when you set Font Effect to "outlined" or "shadowed & outlined". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Outline End CapsPage Report, Web Report, Library ComponentSpecifies the ending style of the text outline, when you set Font Effect to "outlined" or "shadowed & outlined". Choose an option from the drop-down list.
  • butt
    Select to end unclosed subpaths and dash segments with no added decoration.
  • round
    Select to end unclosed subpaths and dash segments with a round decoration that has a radius equal to half of the line width.
  • square
    Select to end unclosed subpaths and dash segments with a square projection that extends beyond the end of the segment to a distance equal to half of the line width.

Data type: Enumeration

Outline JointPage Report, Web Report, Library ComponentSpecifies the joint style of the text outline, when you set Font Effect to "outlined" or "shadowed & outlined". Choose an option from the drop-down list.
  • miter
    Select to join path segments by extending their outside edges until they meet.
  • round
    Select to join path segments by rounding off the corner at a radius of half the line width.
  • bevel
    Select to join path segments by connecting the outer corners of their wide outlines with a straight segment.

Data type: Enumeration

Outline OutlinedPage Report, Web Report, Library ComponentSpecifies whether to use outline path for the text outline, when you set Font Effect to "outlined" or "shadowed & outlined". Default is to apply fill path.

Data type: Boolean

Outline StylePage Report, Web Report, Library ComponentSpecifies the style of the text outline, when you set Font Effect to "outlined" or "shadowed & outlined". Choose an option from the drop-down list.

Data type: Enumeration

Outline ThicknessPage Report, Web Report, Library ComponentSpecifies the width of the text outline, when you set Font Effect to "outlined" or "shadowed & outlined". Type a numeric value to change the thickness.

Data type: Float

Outline TransparencyPage Report, Web Report, Library ComponentSpecifies the transparency of the text outline, when you set Font Effect to "outlined" or "shadowed & outlined". Type a numeric value to change the transparency.

Data type: Integer

Outline Variable DashPage Report, Web Report, Library ComponentSpecifies whether to resize the dash automatically when you select a dash line style for Outline Style. Default is to apply fixed dash size.

Data type: Boolean

Right MarginPage Report, Web Report, Library ComponentSpecifies the distance between the text and the right border of the label, based on the alignment of the text. Type a numeric value to change the margin.

Data type: Float

TextPage Report, Web Report, Library ComponentSpecifies the text of the label. Type a string to change the text.

Data type: String

Text AlignmentPage Report, Web Report, Library ComponentSpecifies the alignment of the text in the label. Choose an option from the drop-down list.

Data type: Enumeration

Texture Background ColorPage Report, Web Report, Library ComponentSpecifies the background color of the texture, when you set Fill Type of the element to "texture". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Texture Foreground ColorPage Report, Web Report, Library ComponentSpecifies the foreground color of the texture, when you set Fill Type of the element to "texture". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Texture StylePage Report, Web Report, Library ComponentSpecifies the style of the texture to fill the element, when you set Fill Type of the element to "texture". Choose an option from the drop-down list.

Data type: Enumeration

Top MarginPage Report, Web Report, Library ComponentSpecifies the distance between the text and the top border of the label, based on the alignment of the text. Type a numeric value to change the margin.

Data type: Float

Word WrapPage Report, Web Report, Library ComponentSpecifies whether to wrap the text according to the width of the label. If the text contains special characters (such as ",", ".", and space), it wraps at the position of one of the characters.

Data type: Boolean

Note icon This property does not take effect for radar charts, bubble charts, scatter charts, or gauge charts.

Background (for customizing fill pattern of the chart label)
Border ColorPage Report, Web Report, Library ComponentSpecifies the color for the border of the object. Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Border End CapsPage Report, Web Report, Library ComponentSpecifies the ending style for the border of the element. Choose an option from the drop-down list.
  • butt
    Select to end unclosed subpaths and dash segments with no added decoration.
  • round
    Select to end unclosed subpaths and dash segments with a round decoration that has a radius equal to half of the line width.
  • square
    Select to end unclosed subpaths and dash segments with a square projection that extends beyond the end of the segment to a distance equal to half of the line width.

Data type: Enumeration

Border JointPage Report, Web Report, Library ComponentSpecifies the joint style for the border of the element. Choose an option from the drop-down list.
  • miter
    Select to join path segments by extending their outside edges until they meet.
  • round
    Select to join path segments by rounding off the corner at a radius of half the line width.
  • bevel
    Select to join path segments by connecting the outer corners of their wide outlines with a straight segment.

Data type: Enumeration

Border OutlinedPage Report, Web Report, Library ComponentSpecifies whether to use outline path for the border of the element. Default is to apply fill path.

Data type: Boolean

Border StylePage Report, Web Report, Library ComponentSpecifies the line style for the border of the object. Choose an option from the drop-down list.

Data type: Enumeration

Border ThicknessPage Report, Web Report, Library ComponentSpecifies the width for the border of the object. Type a numeric value to change the thickness.

Data type: Float

Border TransparencyPage Report, Web Report, Library ComponentSpecifies the transparency for the border of the element, in percent. Type a numeric value to change the transparency.

Data type: Integer

Border TypePage Report, Web Report, Library ComponentSpecifies the type for the border of the element.
  • none
    Select if you do not want to show the border.
  • raised
    Select to show 3-D border that appears as if it is raised off the page.
  • recess
    Select to show 3-D border that appears as if it is pressed into the page.
  • shadow
    Select to show two shadowed borders, beneath and to the right of the object.
  • solid
    Select to use single-line border.

Data type: Enumeration

Border Variable DashPage Report, Web Report, Library ComponentSpecifies whether to resize the dash automatically when you select a dash line style for Border Style. Default is to apply fixed dash size.

Data type: Boolean

ColorPage Report, Web Report, Library ComponentSpecifies the color to fill the element, when you set Fill Type of the element to "color". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Fill TransparencyPage Report, Web Report, Library ComponentSpecifies the transparency for the fill pattern of the element, in percent. Type a numeric value to change the transparency.

Data type: Integer

Fill TypePage Report, Web Report, Library ComponentSpecifies how you want to fill the element, by color, texture, gradient, or image, or not to fill it. Choose an option from the drop-down list.

Data type: Enumeration

Gradient End ColorPage Report, Web Report, Library ComponentSpecifies the ending color of the gradient, when you set Fill Type of the element to "gradient". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Gradient End XPage Report, Web Report, Library ComponentSpecifies the horizontal position where the gradient ends when you set Fill Type of the element to "gradient", measured in a percentage of the element's width or the width of the inset in the element if you define an inset, from the left edge of the element or inset.

Data type: Integer

Gradient End YPage Report, Web Report, Library ComponentSpecifies the vertical position where the gradient ends when you set Fill Type of the element to "gradient", measured in a percentage of the element's height or the height of the inset in the element if you define an inset, from the bottom edge of the element or inset.

Data type: Integer

Gradient Start ColorPage Report, Web Report, Library ComponentSpecifies the starting color of the gradient, when you set Fill Type of the element to "gradient". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Gradient Start XPage Report, Web Report, Library ComponentSpecifies the horizontal position where the gradient begins when you set Fill Type of the element to "gradient", measured in a percentage of the element's width or the width of the inset in the element if you define an inset, from the left edge of the element or inset.

Data type: Integer

Gradient Start YPage Report, Web Report, Library ComponentSpecifies the vertical position where the gradient begins when you set Fill Type of the element to "gradient", measured in a percentage of the element's height or the height of the inset in the element if you define an inset, from the bottom edge of the element or inset.

Data type: Integer

Gradient StylePage Report, Web Report, Library ComponentSpecifies the style of the gradient to fill the element, when you set Fill Type of the element to "gradient". Choose an option from the drop-down list.

Data type: Enumeration

Image FilePage Report, Web Report, Library ComponentSpecifies the file name of the image, a portion of which you want to use to fill the element, when you set Fill Type of the element to "image". Type the file name with suffix in the value cell. If the image is outside the current catalog, you should include the full path of the image correctly.

Data type: String

Image HeightPage Report, Web Report, Library ComponentYou can use the four properties, Image Height, Image Width, Image X, and Image Y, to define a portion of an image (the portion is a rectangle) to fill the element, when you set Fill Type of the element to "image".

Image Height specifies the height of the portion, measured in a percentage of the image's height.

Data type: Integer

Image LayoutPage Report, Web Report, Library ComponentSpecifies the layout of the image portion to fill the element, when you set Fill Type of the element to "image". Choose an option from the drop-down list.
  • tile
    Select to repeat the image portion to fill the element.
  • center
    Select to display the image portion in the center of the element.
  • scaled
    Select to stretch the image portion to cover the entire element.

Data type: Enumeration

Image WidthPage Report, Web Report, Library ComponentYou can use the four properties, Image Height, Image Width, Image X, and Image Y, to define a portion of an image (the portion is a rectangle) to fill the element, when you set Fill Type of the element to "image".

Image Width specifies the width of the portion, measured in a percentage of the image's width.

Data type: Integer

Image XPage Report, Web Report, Library ComponentYou can use the four properties, Image Height, Image Width, Image X, and Image Y, to define a portion of an image (the portion is a rectangle) to fill the element, when you set Fill Type of the element to "image".

Image X specifies the left position of the portion, measured in a percentage of the image's width, from the left edge of the image.

Data type: Integer

Image YPage Report, Web Report, Library ComponentYou can use the four properties, Image Height, Image Width, Image X, and Image Y, to define a portion of an image (the portion is a rectangle) to fill the element, when you set Fill Type of the element to "image".

Image Y specifies the top position of the portion, measured in a percentage of the image's height, from the bottom edge of the image.

Data type: Integer

Inset BottomPage Report, Web Report, Library ComponentYou can use the four properties, Inset Bottom, Inset Left, Inset Right, and Inset Top, to define an inset in the element and fill the inset instead of the entire element.

Inset Bottom specifies the bottom position of the inset, measured in a percentage of the element's height, from the bottom edge of the element.

Data type: Float

Inset LeftPage Report, Web Report, Library ComponentYou can use the four properties, Inset Bottom, Inset Left, Inset Right, and Inset Top, to define an inset in the element and fill the inset instead of the entire element.

Inset Left specifies the left position of the inset, measured in a percentage of the element's width, from the left edge of the element.

Data type: Float

Inset RightPage Report, Web Report, Library ComponentYou can use the four properties, Inset Bottom, Inset Left, Inset Right, and Inset Top, to define an inset in the element and fill the inset instead of the entire element.

Inset Right specifies the right position of the inset, measured in a percentage of the element's width, from the right edge of the element.

Data type: Float

Inset TopPage Report, Web Report, Library ComponentYou can use the four properties, Inset Bottom, Inset Left, Inset Right, and Inset Top, to define an inset in the element and fill the inset instead of the entire element.

Inset Top specifies the top position of the inset, measured in a percentage of the element's height, from the top edge of the element.

Data type: Float

Texture Background ColorPage Report, Web Report, Library ComponentSpecifies the background color of the texture, when you set Fill Type of the element to "texture". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Texture Foreground ColorPage Report, Web Report, Library ComponentSpecifies the foreground color of the texture, when you set Fill Type of the element to "texture". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Texture StylePage Report, Web Report, Library ComponentSpecifies the style of the texture to fill the element, when you set Fill Type of the element to "texture". Choose an option from the drop-down list.

Data type: Enumeration

Icon (for customizing the icon in the chart label)
Border ColorPage Report, Web Report, Library ComponentSpecifies the color for the border of the object. Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Border End CapsPage Report, Web Report, Library ComponentSpecifies the ending style for the border of the element. Choose an option from the drop-down list.
  • butt
    Select to end unclosed subpaths and dash segments with no added decoration.
  • round
    Select to end unclosed subpaths and dash segments with a round decoration that has a radius equal to half of the line width.
  • square
    Select to end unclosed subpaths and dash segments with a square projection that extends beyond the end of the segment to a distance equal to half of the line width.

Data type: Enumeration

Border JointPage Report, Web Report, Library ComponentSpecifies the joint style for the border of the element. Choose an option from the drop-down list.
  • miter
    Select to join path segments by extending their outside edges until they meet.
  • round
    Select to join path segments by rounding off the corner at a radius of half the line width.
  • bevel
    Select to join path segments by connecting the outer corners of their wide outlines with a straight segment.

Data type: Enumeration

Border OutlinedPage Report, Web Report, Library ComponentSpecifies whether to use outline path for the border of the element. Default is to apply fill path.

Data type: Boolean

Border StylePage Report, Web Report, Library ComponentSpecifies the line style for the border of the object. Choose an option from the drop-down list.

Data type: Enumeration

Border ThicknessPage Report, Web Report, Library ComponentSpecifies the width for the border of the object. Type a numeric value to change the thickness.

Data type: Float

Border TransparencyPage Report, Web Report, Library ComponentSpecifies the transparency for the border of the element, in percent. Type a numeric value to change the transparency.

Data type: Integer

Border Variable DashPage Report, Web Report, Library ComponentSpecifies whether to resize the dash automatically when you select a dash line style for Border Style. Default is to apply fixed dash size.

Data type: Boolean

ColorPage Report, Web Report, Library ComponentSpecifies the color to fill the element, when you set Fill Type of the element to "color". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Fill TransparencyPage Report, Web Report, Library ComponentSpecifies the transparency for the fill pattern of the element, in percent. Type a numeric value to change the transparency.

Data type: Integer

Fill TypePage Report, Web Report, Library ComponentSpecifies how you want to fill the element, by color, texture, gradient, or image, or not to fill it. Choose an option from the drop-down list.

Data type: Enumeration

Gradient End ColorPage Report, Web Report, Library ComponentSpecifies the ending color of the gradient, when you set Fill Type of the element to "gradient". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Gradient End XPage Report, Web Report, Library ComponentSpecifies the horizontal position where the gradient ends when you set Fill Type of the element to "gradient", measured in a percentage of the element's width, from the left edge of the element.

Data type: Integer

Gradient End YPage Report, Web Report, Library ComponentSpecifies the vertical position where the gradient ends when you set Fill Type of the element to "gradient", measured in a percentage of the element's height, from the bottom edge of the element.

Data type: Integer

Gradient Start ColorPage Report, Web Report, Library ComponentSpecifies the starting color of the gradient, when you set Fill Type of the element to "gradient". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Gradient Start XPage Report, Web Report, Library ComponentSpecifies the horizontal position where the gradient begins when you set Fill Type of the element to "gradient", measured in a percentage of the element's width, from the left edge of the element.

Data type: Integer

Gradient Start YPage Report, Web Report, Library ComponentSpecifies the vertical position where the gradient begins when you set Fill Type of the element to "gradient", measured in a percentage of the element's height, from the bottom edge of the element.

Data type: Integer

Gradient StylePage Report, Web Report, Library ComponentSpecifies the style of the gradient to fill the element, when you set Fill Type of the element to "gradient". Choose an option from the drop-down list.

Data type: Enumeration

HeightPage Report, Web Report, Library ComponentSpecifies the height of the icon. Type a numeric value to change the height.

Data type: Float

Icon AlignmentPage Report, Web Report, Library ComponentSpecifies the alignment of the icon relative to the text in the label. Choose an option from the drop-down list.

Data type: Enumeration

Icon StylePage Report, Web Report, Library ComponentSpecifies the style of the icon to display in the label. Choose an option from the drop-down list.

Data type: Enumeration

Icon Text GapPage Report, Web Report, Library ComponentSpecifies the distance between the icon and the label text. Type a numeric value to change the gap.

Data type: Float

Image FilePage Report, Web Report, Library ComponentSpecifies the file name of the image, a portion of which you want to use to fill the icon, when you set Fill Type of the icon to "image". Type the file name with suffix in the value cell. If the image is outside the current catalog, you should include the full path of the image correctly.

Data type: String

Image HeightPage Report, Web Report, Library ComponentYou can use the four properties, Image Height, Image Width, Image X, and Image Y, to define a portion of an image (the portion is a rectangle) to fill the icon, when you set Fill Type of the icon to "image".

Image Height specifies the height of the image portion, measured in a percentage of the image's height.

Data type: Integer

Image LayoutPage Report, Web Report, Library ComponentSpecifies the layout of the image portion to fill the element, when you set Fill Type of the element to "image". Choose an option from the drop-down list.
  • tile
    Select to repeat the image portion to fill the element.
  • center
    Select to display the image portion in the center of the element.
  • scaled
    Select to stretch the image portion to cover the entire element.

Data type: Enumeration

Image WidthPage Report, Web Report, Library ComponentYou can use the four properties, Image Height, Image Width, Image X, and Image Y, to define a portion of an image (the portion is a rectangle) to fill the icon, when you set Fill Type of the icon to "image".

Image Width specifies the width of the image portion, measured in a percentage of the image's width.

Data type: Integer

Image XPage Report, Web Report, Library ComponentYou can use the four properties, Image Height, Image Width, Image X, and Image Y, to define a portion of an image (the portion is a rectangle) to fill the icon, when you set Fill Type of the icon to "image".

Image X specifies the left position of the portion, measured in a percentage of the image's width, from the left edge of the image.

Data type: Integer

Image YPage Report, Web Report, Library ComponentYou can use the four properties, Image Height, Image Width, Image X, and Image Y, to define a portion of an image (the portion is a rectangle) to fill the icon, when you set Fill Type of the icon to "image".

Image Y specifies the top position of the portion, measured in a percentage of the image's height, from the bottom edge of the image.

Data type: Integer

Texture Background ColorPage Report, Web Report, Library ComponentSpecifies the background color of the texture, when you set Fill Type of the element to "texture". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Texture Foreground ColorPage Report, Web Report, Library ComponentSpecifies the foreground color of the texture, when you set Fill Type of the element to "texture". Choose a color from the drop-down list, or select Custom to customize a color in the Pick a Color dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Texture StylePage Report, Web Report, Library ComponentSpecifies the style of the texture to fill the element, when you set Fill Type of the element to "texture". Choose an option from the drop-down list.

Data type: Enumeration

WidthPage Report, Web Report, Library ComponentSpecifies the width of the icon. Type a numeric value to change the width.

Data type: Float

BackPrevious Topic  Next TopicNext