Skip to main content

Format Solid Gauge Dialog Box Properties

  • Updated

BackPrevious TopicNext TopicNext

Format Solid Gauge Dialog Box Properties

You can use the Format Solid Gauge dialog box to format a solid gauge chart. This topic describes the properties in the dialog box.

This topic contains the following sections:

You see these elements on all the tabs:

OK

Select to apply any changes you made here and exit the dialog box.

Cancel

Select to close the dialog box without saving any changes.

Help

Select to view information about the dialog box.

Circular Graph Tab Properties

Specify the properties for the arcs in the solid gauge.

Format Solid Gauge dialog box - Circular Graph

Circular

Specify the size of the arcs.

  • Angle
    Specify the degree for angles of the arcs. Select the angle of the gauge from the list, or select Customized to open the Customize Gauge Angle dialog box to specify the start angle and end angle.
  • Thickness
    Specify the thickness of the arcs, in inches.
  • Hole Size
    Specify the relative size of an arc in a percentage of total arc size.
  • Start Style
    Select the style of the start graph of the arcs.
  • End Style
    Select the style of the end graph of the arcs.

Fill

Specify the color of the arcs.

  • Color
    Specify the color of the arcs.
  • Color List
    Select to open the Color List dialog box to specify the color of the arcs.
  • Transparency
    Specify the transparency for the color of the arcs.
  • Background
    Specify the background color of the arcs.
  • Use Range Color
    Select to use the color you define for the ranges as the color of the arcs. In this case, Server disables the Color, Color List, and Transparency properties.

Border

Specify the border properties of the arcs.

  • Line Style
    Select the line style of the border.
  • Border Type
    Select the type of the border.
  • Color
    Specify the color of the border. To change the color, select the color indicator to access the Select Color dialog box, and then specify a new color. You can also type a hexadecimal RGB value to specify a color, for example, #9933ff.
  • Transparency
    Specify the transparency for the color of the border.
  • Thickness
    Specify the thickness of the border, in inches.

Axis Tab Properties

The tab consists of four sub tabs: Axis, Tick Mark, Label, and Format.

Axis

Specify the properties of the axis in the solid gauge.

Format Solid Gauge dialog box - Axis - Axis tab

Show Axis

Select to show the axis in the solid gauge.

Type

Specify the position relationship of the axis and the arcs.

  • Inside
    Select to display the axis inside the arcs.
  • Outside
    Select to display the axis outside the arcs.
  • Center
    Select to display the axis in the center of the arcs.

Option

Specify the values you want to display on the axis.

  • Minimum Value
    Specify the minimum value on the axis.
  • Maximum Value
    Specify the maximum value on the axis.

Line

Specify the properties of the axis line.

  • Color
    Specify the color of the line.
  • Style
    Select the style of the line.
  • Transparency
    Specify the transparency for the color of the line.
  • Thickness
    Specify the thickness of the line.
  • Use Range Color
    Select to use the color you define for the ranges as the line color. In this case, Server disables the Color and Transparency properties.

Gap

  • Circular Axis Gap
    Specify the gap between the axis and the arcs if the axis is inside or outside of the arcs.

Tick Mark

Specify the properties of the tick marks on the axis.

Format Solid Gauge dialog box - Axis - Tick Mark

Type

Specify the type of the tick marks on the axis.

  • None
    Select if you don't want to display the tick marks on the axis. Then, ignore all the other tick mark related properties.
  • Inside
    Select to display the tick marks inside the axis.
  • Outside
    Select to display the tick marks outside the axis.
  • Center
    Select to display the tick marks in the center of the axis.

Major Tick Mark Line

Specify the properties of the major tick mark line.

  • Correlate with Axis
    Select if you want the line properties of the major tick marks to correlate with that of the axis automatically.
    • Color
      Specify the color of the major tick mark line. Server disables this property when you select Use Range Color on the Axis > Axis tab.
    • Style
      Select the style of the major tick mark line.
    • Transparency
      Specify the color transparency of the major tick mark line. Server disables this property when you select Use Range Color on the Axis > Axis tab.
    • Thickness
      Specify the thickness of the major tick mark line.
  • Increment
    Specify the distance between two adjacent major tick marks on the axis.
  • Number of Tick Marks 
    Specify the number major tick marks you want to display on the axis.
  • Tick Mark Length 
    Specify the length of the major tick mark line, in inches.

Minor Tick Mark Line

Specify the properties of the minor tick mark line.

  • Correlate with Axis
    Select if you want the line properties of the minor tick marks to correlate with that of the axis automatically.
    • Color
      Specify the color of the minor tick mark line. Server disables this property when you select Use Range Color on the Axis > Axis tab.
    • Style
      Select the style of the minor tick mark line.
    • Transparency
      Specify the color transparency of the minor tick mark line. Server disables this property when you select Use Range Color on the Axis > Axis tab.
    • Thickness
      Specify the thickness of the minor tick mark line.
  • Increment
    Specify the distance between two adjacent minor tick marks on the axis.
  • Number of Tick Marks 
    Specify the number of minor tick marks you want to display on the axis.
  • Tick Mark Length 
    Specify the length of the minor tick mark line, in inches.

Label

Specify the properties of the major tick mark labels.

Format Solid Gauge dialog box - Axis - Label

Option

Specify the type of the labels.

  • None
    Select if you don't want the labels to show.
  • Normal
    Select if you want to customize the labels.
    • Label Every N Major Tick Marks
      Specify the frequency at which you want to label the major tick marks.
    • Number of Major Labels
      Specify the number of major tick mark labels to display on the axis.
      • Auto
        Select to display all major tick mark labels.
      • Fixed
        Select and specify the number of the major tick mark labels to display on the axis.
  • Range Value
    Select if you want the labels to show the range values you define.
  • Min and Max Value
    Select if you want the labels to show the minimum value and maximum value you define on the Axis > Axis tab.

Gap

Specify the gap properties for the data labels.

  • Label Axis Gap 
    Specify the distance between the data labels and the axis, in inches.
  • Best Effect
    Select to adjust the data labels automatically to place them in the best positions. In this case, Server hides some labels when they overlap.

Font

Specify the font format of text in the data labels.

  • Font
    Select the font face of the text.
  • Size
    Specify the font size of the text.
  • Fill Type
    Select the fill type of the text: none, color, texture, or gradient.
  • Color 
    Specify the font color of the text. Server disables this property when you select Use Range Color on the Axis > Axis tab.
  • Font Style
    Select the font style of the text: plain, bold, italic, or bold italic.
  • Transparency
    Specify the color transparency of the text. Server disables this property when you select Use Range Color on the Axis > Axis tab.

Orientation

  • Angle
    Specify the rotation angle of the data labels.

Format

Specify the data format of the major tick mark labels. See Format.

Format Solid Gauge dialog box - Axis - Format

Pointer Tab Properties

Specify the properties of the pointers in the solid gauge.

Format Solid Gauge dialog box - Pointer

Pointer Style

Specify the style of the pointers.

  • Arrow
    Select to use arrow as the pointer style.
    • Value Pointer
      Specify the style of the value pointers. Select a style from the list, or select Customized to specify another image as the value pointers in the Insert Image dialog box.
    • Width
      Specify the width of the arrow.
    • Height
      Specify the height of the arrow.
  • Mark
    Select to use mark as the pointer style.
    • Value Pointer
      Specify the style of the value pointers. Select a style from the list, or select Customized to specify another image as the value pointers in the Insert Image dialog box.
    • Width
      Specify the width of the marks.
    • Height
      Specify the height of the marks.
    • Position
      Select the position relationship of the mark and the arc.
    • Gap
      Specify the distance between the mark and the arc, in inches.
  • Style List
    Select to open the Style List dialog box to specify the style for pointers in the same data series respectively.

Pointer Color

Specify the color properties of the pointers.

  • Color
    Specify the color of the pointers.
  • Color List
    Select to open the Color List dialog box to specify the pointer color.
  • Transparency
    Specify the transparency for the color of the pointers.
  • Use Range Color
    Select to use the color you define for the ranges as the pointer color. In this case, Server disables the preceding three properties.

Pointer Value

Specify the pointer value properties.

  • Show Pointer Value
    Select to show the pointer values.
  • Position
    Select the position relationship between the values and the pointers. If you select customized, the X and Y settings on the General tab of the Format Pointer Label dialog box will take effect.

Pointer Border

Specify the properties of the pointer border.

  • Show Pointer Border
    Select to show the border of the pointers and enable the following border properties.
    • Line Style
       Select the line style to apply to the border.
    • Color
      Specify the color of the border.
    • Thickness
      Specify the weight of the border, in inches.
    • Transparency
      Specify the transparency for the color of the border.

Target Tab Properties

Specify the properties of the target in the solid gauge.

Format Solid Gauge dialog box - Target

Use Target Value

Select to use the target value for the solid gauge and enable the Target Value property.

Target Value

Specify the target value.

Pointer Style

Specify the pointer style for the target value.

  • Target Pointer
    Specify the style of the target pointer. Select a style from the list, or select Customized to specify another image as the target pointer in the Insert Image dialog box.
  • Width
    Specify the width of the target pointer.
  • Height
    Specify the height of the target pointer.
  • Position
    Select the position of the target pointer relative to the arc.
  • Gap
    Specify the distance between the target pointer and the arc.

Pointer Color

Specify the color properties of the target pointer.

  • Color
    Specify the color of the target pointer.
  • Transparency
    Specify the transparency for the color of the target pointer.

Target Value

Specify the properties of the target value.

  • Show Target Value
    Select to show the target value on the solid gauge.
  •  Position
    Select the position of the target value relative to the arc. If you select customized, the X and Y settings on the General tab of the Format Target Label dialog box will take effect.

Frame Tab Properties

Specify the properties for the frame of the solid gauge chart.

Format Solid Gauge dialog box - Frame

Size

Specify the size properties of the frame.

  • Frame Size
    Specify the size of the frame.

Fill

Specify the color and transparency of the frame.

  • Fill
    Specify the color to fill the frame.
  • Transparency
    Specify the transparency of the color to fill the frame.

Border

Specify the properties for the border of the frame.

  • Line Style
    Select the line style of the border.
  • Border Type
    Select the type of the border.
  • Color
    Specify the color of the border. To change the color, select the color indicator to access the Select Color dialog box, and then specify a new color. You can also type a hexadecimal RGB value to specify a color, for example, #9933ff.
  • Transparency
    Specify the transparency for the color of the border.
  • Thickness
    Specify the thickness of the border, in inches.

Gauge Group Name

Specify the properties for the gauge group name.

  • Show Gauge Group Name
    Select to show the names for the arcs in the solid gauge which are values of the field on its category axis. If the solid gauge contains no category field, the group name shows Report by default.
    • Position
      Select the position of the names relative to the arcs. If you select customized, the X and Y settings on the General tab of the Format Gauge Label dialog box will take effect.

Range Color Tab Properties

Specify different colors to fill the arcs in the solid gauge in different ranges.

Format Solid Gauge dialog box - Range Color

Add buttonAdd button

Select to add a new color range.

Remove buttonRemove button

Select to remove the selected color range.

Range table

  • Minimum
    Specify the minimum value of a range.

  • Maximum
    Specify the maximum value of a range.

  • Color
    Select the color cell to open the Select Color dialog box, and specify a new color.

  • Name
    Specify the name of a range.

Others

Specify the properties for values that do not fall into any of the ranges you define in the range table.

  • Name
    Specify the name for the values.
  • Color
    Specify the color for the values. To change the color, select the color indicator to access the Select Color dialog box, and then specify a new color. You can also type a hexadecimal RGB value to specify a color, for example, #9933ff.

Hint Tab Properties

Specify the properties of the data marker hint.

Format Solid Gauge dialog box - Hint

Show Category and Series

Select to include the category and series values in the data marker hint.

Auto Scale in Number

Select true if you want to automatically scale the values that are of the Number data type when the values fall into the two ranges:
  • When 1000 <= value < 10^15, Logi Report uses the following quantity unit symbols of the International System of Units to scale the values: K (10^3), M (10^6), G (10^9), and T (10^12).
  • When 0 < value < 0.001 or value >= 10^15, Logi Report uses scientific notation to scale the values.

The default value auto means that the setting follows that of the chart platform.

BackPrevious TopicNext TopicNext