Skip to main content

Format Line Dialog Box

  • Updated
Not yet followed by anyone

BackPrevious Topic  Next TopicNext

Format Line Dialog Box

You can use the Format Line dialog box to format the lines in a line chart. This topic describes the options in the dialog box.

Designer displays the Format Line dialog box when you right-click a line in a line chart and select Format Line from the shortcut menu, or double-click any line in a line chart.

The dialog box contains the following tabs (Designer displays the Node tab for a 2-D line chart, the Border tab for a 3-D line chart, and the Behaviors tab when the chart is in a library component):

You see these buttons in the tabs:

OK

Select to apply your settings and close the dialog box.

Cancel

Select to close the dialog box without saving any changes.

Apply

Select to apply all changes and leave the dialog box open.

Help

Select to view information about the dialog box.

General Tab

Designer displays different options in the General tab for a 2-D line chart and a 3-D line chart. You can use it to specify the general properties of the lines.

For 2-D Line Chart

Format Line - General 2-D

Layout

You can specify the layout of the lines in this box.

  • None
    Select to display trend over categories on the lines.
  • Stacked
    Select to display the trend of the contribution of each data value over categories on the stacked lines.
  • 100% Stacked
    Select to display the trend of the percentage that each data value contributes over categories on the 100% stacked lines.

Depth

You can specify the depth properties of the lines in this box.

  • Use Depth
    Specify whether to make the lines three-dimensional. You can also select Formula button to use a formula to control the property if the chart uses a query resource.
    • Depth
      Specify the depth of the lines, in pixels.
    • Direction
      Specify the direction for depth of the lines, in degrees.

Ignore Null Value

Select to ignore the null data values when drawing lines in the chart. If you select this option, when a null data value appears on a line, Designer ignores the value and draws the line from the previous data value to the next data value directly; otherwise, the line is broken at the point of the null data value.

Smoothed Line

Select to draw the lines smoothly without the sharp joints.

For 3-D Line Chart

Format Line - General 3-D

Thickness

Specify the thickness of the lines, in pixels.

Ignore Null Value

Select to ignore the null data values when drawing lines in the chart. If you select this option, when a null data value appears on a line, Designer ignores the value and draws the line from the previous data value to the next data value directly; otherwise, the line is broken at the point of the null data value.

Fill Tab

Use this tab to specify the color pattern to fill the chart lines.

Format Line - Fill

Use Single Color

Select to apply single color pattern to the chart lines.

  • Self Settings
    Select to apply the color pattern to the chart lines themselves only. If you do not select the option, Designer synchronizes the color settings you define here to the Pattern List property on the chart object in the Report Inspector, which the data markers of other subtypes can also apply if the chart is a combo chart.
  • Fill/Normal Fill
    You can specify the fill effect of the chart lines in this box. Designer disables this box for a 2-D line chart when you select Apply Color to Line in the Node tab.
    • Color
      Specify the color for the selected chart line. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
    • Transparency
      Specify the transparency of the color.
    • Pattern List/Color List
      Select to open the Color List dialog box to modify the color pattern for each line in the chart.
  • Area
    Designer displays the box for a 2-D line chart. You can use it to specify properties of the areas that are formed by the chart axes and the lines.
    • Fill Area
      Select to fill the areas. Designer enables the other options in the box when you select this option.
    • Color
      Specify the color to fill the selected chart line area. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
    • Transparency
      Specify the transparency of the color.
    • Area Pattern List
      Select to open the Color List dialog box to modify the color pattern of the areas formed by each chart line and the axes.
  • Line
    Designer displays the box for a 2-D line chart. You can use it to specify the line pattern of the chart lines.
    • Line Style
      Select the style of the selected chart line.
    • Thickness
      Specify the thickness of the selected chart line, in pixels.
    • Line Pattern List
      Select to open the Line Pattern List dialog box to modify the line pattern for each line in the chart.

Use Single Color with Condition

Designer enables this option for a 2-D line chart. Select it if you want to make each line apply its own single color pattern based on the defined conditions. You can select Advanced or Normal to switch between the two editing modes to edit the conditions.

  • Normal
    • Select Field
      This drop-down list contains all the available fields to which you can apply the conditional fill. Select the field on which you want to define the conditions.
    • Add buttonAdd button
      Select to add a new condition.
    • Edit buttonEdit button
      Select to open the Edit Line Style dialog box to edit the line properties for values which meet the specified condition.
    • Trash Can buttonRemove button
      Select to delete the specified user-defined condition.
    • Value
      Designer displays the column when you select the category or series field of the chart, or a field the values of which are not numbers from the Select Field drop-down list. It shows the values that you specify for each condition.
    • Start Value
      Designer displays the column when you select a value field of the chart, or a field containing numeric values from the Select Field drop-down list. It shows the start values that you specify for each condition.
    • End Value
      Designer displays the column when you select a value field of the chart, or a field containing numeric values from the Select Field drop-down list. It shows the end values that you specify for each condition.
    • Color
      This column shows the colors that you specify to apply to the values which meet the conditions. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
    • Transparency
      This column shows the transparency of the colors that you specify for the conditions.
    • Style
      This column shows the line styles that you specify for the conditions.
    • Label
      Select to modify the expression of the specified condition, which Designer displays as its legend entry label.
    • Value
      Designer displays this option after you select a value field of the chart, or a field containing numeric values from the Select Field drop-down list. Select it if you want to display data in the condition expression as value.
    • Percent
      Designer displays this option after you select a value field of the chart, or a field containing numeric values from the Select Field drop-down list, and enables it only when the chart is of the 100% Stacked Line 2-D type. Select it if you want to display data in the condition expression in percent.
  • Advanced
    • Add buttonAdd button
      Select to open the Edit Conditions dialog box to create a condition and define the line properties for values which meet the condition.
    • Edit buttonEdit button
      Select to open the Edit Line Style dialog box for editing the line properties if you select the default condition "Other"; or open the Edit Conditions dialog box to edit the condition and the line properties for values which meet the condition, if you select a user-defined condition.
    • Trash Can buttonRemove button
      Select to delete the specified user-defined condition.
    • Condition
      This column shows the default condition "Other" and the expressions of the conditions that you define in the Edit Condition dialog box
    • Color
      This column shows the colors that you specify to apply to the values which meet the conditions. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box. Designer disables the column when you select Apply Color to Line in the Node tab.
    • Transparency
      This column shows the transparency of the colors that you specify for the conditions. Designer disables the column when you select Apply Color to Line in the Node tab.

      Note icon For a user-defined condition, Designer disables the Color and Transparency columns for it, if you edit the condition using Imported Condition. You can only use the Edit Condition dialog box to edit the two properties for the condition.

    • Style
      This column shows the line styles that you specify for the conditions.
    • Label
      Select to modify the expression of the specified condition, which Designer displays as its legend entry label.
    • Value
      This option indicates that Designer displays data in the condition expressions as value. You cannot change it.
    • Percent
      Designer does not support this option when you edit conditions in the advanced mode.

Use Multiple Colors with Condition

Designer does not support this fill type on line charts.

Sample

This box displays a preview sample based on your selections.

Node Tab

Designer displays the Node tab when the chart is a 2-D line chart. You can use it to specify properties of the nodes on chart lines.

Format Line - Node

Use Single Color

Select to apply single color pattern to the nodes.

  • Self Settings
    Select to apply the color pattern to the nodes themselves only. If you do not select the option, Designer synchronizes the color settings you define here to the Pattern List property on the chart object in the Report Inspector, which the data markers of other subtypes can also apply if the chart is a combo chart.

  • Shape
    You can specify the shape properties of the nodes in the selected chart line in this box.
    • Style
      Select the style of the nodes in the selected chart line.
    • Transparency
      Specify the color transparency of the nodes in the selected chart line.
    • Width
      Specify the width of the nodes in the selected chart line, in pixels.
    • Height
      Specify the height of the nodes in the selected chart line, in pixels.
    • Show Node
      Specify whether to show nodes in the selected chart line. Designer applies the node related properties for the line only when you select "true" for this option; however, it does not control the options Show High Point and Show Low Point and the Color property for each.
      • Color
        Specify the color of the nodes in the selected chart line. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
    • Show High Point
      Specify whether to show the line node in the highest point in the selected chart line.
      • Color
        Specify the color of the node in the highest point in the selected chart line. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
    • Show Low Point
      Specify whether to show the line node in the lowest point in the selected chart line.
      • Color
        Specify the color of the node in the lowest point in the selected chart line. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
    • Show Highlight Point
      Specify whether to show the highlight point when you hover the mouse over a node in the selected chart line.
      • Color
        Specify the color of the highlight point in the selected chart line. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
  • Border
    Designer displays the box when you select a node style other than any of the following: plus, multiplication, star1, or star2. You can use it to specify the border properties of the nodes in the selected chart line.
    • Border Color
      Specify the color for the border of the nodes in the selected chart line. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
    • Transparency
      Specify the transparency for the border of the nodes in the selected chart line.
    • Thickness
      Specify the thickness for the border of the nodes in the selected chart line, in pixels.
    • Line Style
      Select the line style for the border of the nodes in the selected chart line.
  • Line
    Designer displays the box when you select the node style as one of the following: plus, multiplication, star1, and star2. You can use it to specify the line properties of the nodes in the selected chart line.
    • Line Style
      Select the line style of the nodes in the selected chart line.
    • Thickness
      Specify the line thickness of the nodes in the selected chart line.
  • Node Pattern List
    Select to open the Node Pattern List dialog box to modify the node pattern for each chart line.

Note icon Designer displays the button Formula button for some options if the chart uses a query resource. It indicates that you use a formula to control the value of an option.

Use Single Color with Condition

Select to make each node apply its own single color pattern based on the defined conditions. You can select Advanced or Normal to switch between the two editing modes to edit the conditions.

  • Normal
    • Select Field
      This drop-down list contains all the available fields to which you can apply the conditional fill. Select the field on which you want to define the conditions.
    • Add buttonAdd button
      Select to add a new condition.
    • Edit buttonEdit button
      Select to open the Edit Node Style dialog box to edit the node properties for the selected condition.
    • Trash Can buttonRemove button
      Select to delete the specified user-defined condition.
    • Value
      Designer displays the column when you select the category or series field of the chart, or a field the values of which are not numbers from the Select Field drop-down list. It shows the values that you specify for each condition.
    • Start Value
      Designer displays the column when you select a value field of the chart, or a field containing numeric values from the Select Field drop-down list. It shows the start values that you specify for each condition.
    • End Value
      Designer displays the column when you select a value field of the chart, or a field containing numeric values from the Select Field drop-down list. It shows the end values that you specify for each condition.
    • Color
      This column shows the colors that you specify to apply to the values which meet the conditions. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
    • Transparency
      This column shows the transparency of the colors that you specify for the conditions.
    • Style
      This column shows the node styles that you specify for the conditions.
    • Label
      Select to modify the expression of the specified condition, which Designer displays as its legend entry label.
    • Value
      Designer displays this option after you select a value field of the chart, or a field containing numeric values from the Select Field drop-down list. Select it if you want to display data in the condition expression as value.
    • Percent
      Designer displays this option after you select a value field of the chart, or a field containing numeric values from the Select Field drop-down list, and enables it only when the chart is of the 100% Stacked Line 2-D type. Select it if you want to display data in the condition expression in percent.
  • Advanced
    • Add buttonAdd button
      Select to open the Edit Conditions dialog box to create a condition and define the node properties for values which meet the condition.
    • Edit buttonEdit button
      Select to open the Edit Node Style dialog box for editing the node properties if you select the default condition "Other"; or open the Edit Conditions dialog box to edit the condition and the node properties for values which meet the condition, if you select a user-defined condition.
    • Trash Can buttonRemove button
      Select to delete the specified user-defined condition.
    • Condition
      This column shows the default condition "Other" and the expressions of the conditions that you define in the Edit Condition dialog box.
    • Color
      This column shows the colors that you specify to apply to the values which meet the conditions. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
    • Transparency
      This column shows the transparency of the colors that you specify for the conditions.

      Note icon For a user-defined condition, Designer disables the Color and Transparency columns for it, if you edit the condition using Imported Condition. You can only use the Edit Condition dialog box to edit the two properties for the condition.

    • Style
      This column shows the node styles that you specify for the conditions.
    • Label
      Select to modify the expression of the specified condition, which Designer displays as its legend entry label.
    • Value
      This option indicates that Designer displays data in the condition expressions as value. You cannot change it.
    • Percent
      Designer does not support this option when you edit conditions in the advanced mode.

Use Multiple Colors with Condition

Designer does not support this fill type on line charts.

Apply Color to Line

Select to apply the color pattern that you specify on the nodes apply to the corresponding lines.

Sample

This box displays a preview sample based on your selections.

Border Tab

Designer displays the Border tab when the chart is a 3-D line chart. You can use it to specify properties for the border of the 3-D lines.

Format Line - Border

Show Border

Select to show the border of the 3-D lines. Designer enables the other border properties in this tab after you select this option.

Color

Specify the color of the border. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.

Transparency

Specify the transparency for the color of the border.

Line Style

Select the line style of the border.

Thickness

Specify the width of the border, in pixels.

End Caps

Select the ending style of the border line.

  • butt
    Select to end unclosed sub paths and dash segments with no added decoration.
  • round
    Select to end unclosed sub paths and dash segments with a round decoration that has a radius equal to half of the width of the pen.
  • square
    Select to end unclosed sub paths and dash segments with a square projection that extends beyond the end of the segment to a distance equal to half of the line width.

Line Joint

Select the joint style of the border line.

  • miter
    Select to join path segments by extending their outside edges until they meet.
  • round
    Select to join path segments by rounding off the corner at a radius of half the line width.
  • bevel
    Select to join path segments by connecting the outer corners of their wide outlines with a straight segment.

Sample

This box displays a preview sample based on your selections.

Path

You can specify the fill pattern of the border in this box.

  • Outline Path
    Select to use outline path for the border.
  • Fill Path
    Select to use whole path for the border.

Dash

You can specify the dash size of the border in this box if you select a dash line style for the border.

  • Auto Adjust Dash
    Select to adjust the dash size automatically.
  • Fixed Dash Size
    Select to use fixed dash size.

Data Label Tab

Use this tab to specify properties of the data labels on the lines.

Format Line - Data Label

Static Data Label

You can specify properties of the static data labels on the lines in this box. Designer disables this box for a 3-D line chart.

  • Show Static Data Label
    Select to show the static data labels. Designer enables the other static data label properties after you select this option.
  • Position
    Select the position of the static data labels on the lines.
    • auto fit
      Select to display the static data labels automatically.
    • top center
      Select to display the static data labels on the top center of the line nodes.
    • top left
      Select to display the static data labels on the top left of the line nodes.
    • top right
      Select to display the static data labels on the top right of the line nodes.
    • bottom left
      Select to display the static data labels at the bottom left of the line nodes.
    • bottom center
      Select to display the static data labels at the bottom center of the line nodes.
    • bottom right
      Select to display the static data labels at the bottom right of the line nodes.
  • Data Label Type
    Select in which way to display the values in the static data labels.
    • value
      Select to show the value for each line node.
    • percent
      Select to show the percentage of each line node to the total.
    • value and percent
      Select to show the value and the percentage for each line node.
  • Auto Scale in Number
    Specify whether to automatically scale the Number values in the static data labels that fall into the two ranges:
    • When 1000 <= value < 10^15, Logi Report Engine applies the following quantity unit symbols of the International System of Units to scale the values: K (10^3), M (10^6), G (10^9), and T (10^12).
    • When 0 < value < 0.001 or value >= 10^15, Logi Report Engine uses scientific notation to scale the values.

    By default, Designer selects "auto" for the option, meaning, Designer applies the setting that you specify for the same property on the chart in the Report Inspector for the values. If you select "true", Designer applies the specified format to the integer part of the values after scaling them; however, if the specified format conflicts with the logic of Auto Scale in Number, for example, the values display in percentage, Designer ignores the Auto Scale in Number setting. Select "false" if you do not want to scale the values.

  • Suppress Label When 0
    Select if you do not want to display the static data label whose value is 0 in the chart.

Font

You can specify the font format of the text in the static data labels in this box.

  • Font list
    This drop-down list contains all the font faces that you can select to apply to the text.
  • Font Size
    Specify the font size of the text.
  • Font Color
    Specify the font color of the text. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
  • Transparency
    Specify the color transparency of the text.
  • Rotation
    Specify the rotation angle of the text around its center, in degrees. The default value is 0.
  • Shearing
    Specify the gradient of the text.

Effects

You can specify the special effects for the text in the static data labels in this box.

  • Style
    Select the font style of the text. It can be one of the following: plain, bold, italic, and bold italic.
  • Strikethrough
    Select the style of the horizontal line using which to strikethrough the text. It can be one of the following: none, thin line, bold line, and double lines.
  • Underline
    Select the style of the horizontal line under the text. It can be one of the following: none, single, single lower, bold line, bold lower, double lines, bold double, patterned line, and bold patterned. When you select "patterned line" or "bold patterned", Designer draws a line or bold line in the pattern of the text.

    • Note icon Web Report Studio and JDashboard do not support underlining chart text, therefore, this property is ignored when the chart runs in Web Report Studio or is used in a dashboard.

  • Superscript
    Select to raise the text above the baseline and change the text to a smaller font size, if a smaller size is available.
  • Embossed
    Select to make the text appear to be raised off the page in relief.
  • Outlined
    Select to display the inner and outer borders of each character.
  • Subscript
    Select to lower the text below the baseline and change the text to a smaller font size, if a smaller size is available.
  • Engraved
    Select to make the text appear to be imprinted or pressed into the page.
  • Shadowed
    Select to add a shadow beneath and to the right of the text.

Hint Tab

Use this tab to specify properties for the hint of the lines.

Format Line - Hint

Show Category and Series

Select to include the category and series values in the hint.

Auto Scale in Number

Specify whether to automatically scale the Number values in the hint that fall into the two ranges:

  • When 1000 <= value < 10^15, Logi Report Engine applies the following quantity unit symbols of the International System of Units to scale the values: K (10^3), M (10^6), G (10^9), and T (10^12).
  • When 0 < value < 0.001 or value >= 10^15, Logi Report Engine uses scientific notation to scale the values.

By default, Designer selects "auto" for the option, meaning, Designer applies the setting that you specify for the same property on the chart in the Report Inspector for the values. If you select "true", Designer applies the specified format to the integer part of the values after scaling them; however, if the specified format conflicts with the logic of Auto Scale in Number, for example, the values display in percentage, Designer ignores the Auto Scale in Number setting. Select "false" if you do not want to scale the values.

Customize Chart Value Names

Select to customize the names of the fields on the value axis which you want to display in the hint. By default, Designer applies the display names of the fields in the hint to label the values which may be not intuitive to users. You can select the option and select the ellipsis Ellipsis button to customize the names in the Customize Chart Value Names dialog box to help users better understand the values.

Behaviors Tab

Designer displays the Behaviors tab only when the line chart is in a library component. You can use it to specify web behaviors to the lines.

Format Line - Behaviors

Add buttonAdd button

Select to add a new web behavior line.

Trash Can buttonRemove button

Select to delete the specified web behavior.

Move Up buttonMove Up button

Select to move the specified web behavior higher in the list. At runtime, when an event bound with more than one action happens, JDashboard triggers the upper action first.

Move Down buttonMove Down button

Select to move the specified web behavior lower in the list.

Events

This column shows the events that you select to trigger the web actions.

Actions

This column shows the web actions that you specify for the events to trigger. Select the ellipsis Ellipsis button in each cell to bind the web action using the Web Action List dialog box.

BackPrevious Topic  Next TopicNext