Previous Topic Next Topic

Formula Syntax

Logi JReport formula syntax is a syntax with simple flow control and other statements. You should follow Logi JReport formula syntax when writing formulas.

In this syntax, sequence and selection control structure are supported. You can use it to control the execution of the statements. In this syntax, a parameter can be used as variable, and its value can be used in computation or making decisions. Since the value of the parameter is input before the report is run, the report can respond to user input and generate different results.

Below is a list of the sections covered in this topic:

• Statements
  • Declare Statement
  • Expression Statement
  • Assignment Statement
  • If - else Statement
  • Return Statement
  • For Statement
  • While Statement
  • Select Statement
• Expression
  • Values in Formula Expressions
    • Value Data Types
    • Report Level Global Variables

Statements

The statement is the smallest executable unit in the syntax. A formula is a sequence of statements. Statements are separated by semicolon (;). There are many kinds of statements, such as declare statement, expression statement, assignment statement, if-else statement, and return statement.

Declare Statement

The declare statement is used to declare variables.

• Syntax: VariableType VariableName;

  Example: String sql;

  This statement declares a local String type variable called sql.

• Syntax: global VariableType VariableName;

  Example: global integer i;

  This statement declares a global Integer type variable called i. Global variables can only be used in page reports.

Expression Statement

The expression statement is used to calculate the value of an expression.

Assignment Statement

The assignment statement is used to calculate the expression on the right side of assignment operator and assign the value to the variable on the left side.

Syntax: Variable = Expression

The type of value of expression must be compatible with the type of the variable.

Example: total = amount * price

In this example, where the total, amount and price are declared variables. The statement calculates the "amount * price" and assigns the value to "total".

If - else Statement

The if-else statement provides conditional control of an action. Normally, the statements are executed one by one sequentially. The if-else statement enables alternative actions that depend on the evaluation result of the expression.

Syntax:

• if (expression) {
      statement(s);}
• if (expression) {
      statement(s);}
  else {
      statement(s);}

Where, the expression must be a logical expression and have a Boolean value. The if clause checks the condition presented by the logical expression. If the condition is true, the statement following the if will be executed. Otherwise, the statement following the else will be executed.

Example:

If (score >= 60) {
    return "PASS";}
else {
    return "FAIL";}

In this example, if the score is greater than or equal to 60, the result is pass, otherwise the result is fail.

Return Statement

The return statement is used to stop the execution of procedure and return a value if necessary. The return statement is the last statement executed.

Syntax: return or return expression;

The expression will be calculated before the procedure returns.

Example: return results;

For Statement

The for statement provides a compact way to iterate over a range of values.

Syntax:

• for (initialization; termination; increment) {
      statement;
  };

• for (initialization; termination; increment) statement;

The initialization is an expression that initializes the loop - it's executed once at the beginning of the loop. The termination expression determines when to terminate the loop. This expression is evaluated at the top of each iteration of the loop. When the expression evaluates to false, the loop terminates. Finally, increment is an expression that gets invoked after each iteration through the loop. All these components are optional.

Examples:

integer i=0, j=0;
For(i=0;i<100;i=i+1){
    j=j+1;
};
return j;

Any time there is a single statement you do not need the curly braces so the following formula works the same.

integer i=0, j=0;
For(i=0;i<100;i=i+1) j=j+1;
return j;

Both examples will return 100 as the result.

integer siteint=0;
string stite="&_isMultiple_jrs.param$Site=true";

if(@P_int==0) then
    stite=stite+"&jrs.param$Site=%07"
else {
    for(siteint=0;siteint<@P_int;siteint=siteint+1)
    stite= stite+"&jrs.param$Site=" + @P_int
};
return stite;

While Statement

The while statement is used to continually execute a block of statements while a condition remains true.

Syntax:

• while (expression) do {
      statement;
  };
• while(expression) do statement;

First, the while statement evaluates expression, which must return a Boolean value. If it returns true, the while statement executes the statement associated with it. The while statement continues testing the expression and executing its block until the expression returns false.

Examples:

• integer i=0;
While(i<100) do {
    i=i+1;
};
return i;
• integer i=0;
While(i<100) do i=i+1;
return i;

Both examples will return 100 as the result.

Logi JReport also provides another statement that is similar to the while statement, the do-while statement.

Syntax:

• do {
      statement(s);
  } while (expression);
• do statement while(expression);

Instead of evaluating the expression at the top of the loop, do-while evaluates the expression at the bottom. Thus the statements associated with a do-while are executed at least once.

Examples:

• integer j=0;
Do {
    j=j+1;}
while(j<100);
return j;
• integer j=0;
Do j=j+1 while(j<100);
return j;

Both examples will return 100 as the result.

Select Statement

The select statement is usually used in the case that the value of a single variable may determine one of a number of different choices.

A select statement is given a variable and compares its value to all cases in the switch; if there is a case that matches the value, all statements in the matching case are executed. If none match, and a default is given, all statements following the default keyword are executed.

Syntax:

Select (variable name){
    case expression_1: statement
    case expression_2: statement
    ...
    default: statement
};

The expression_1 and expression_2 should be variables or constants. The statement in each should be a single statement or multi-statement (compound statement). When multi-statement is used, they must be enclosed by {}.

Examples:

• integer i = 0 ; string j = 'a';
i = @"Customers_Customer ID";
select(i) {
    case 1: j='bb'
    case 2: j='cc'
    default: j ='dd'
};
return j;
• string state="",result="";
if (IsNull(@Customer_State)) then
    state="Others"
else
    state = @Customer_State;
select (state) {
    case "BC","ID","MT","WA":result="Northwest"
    case "CA","AZ","TX","NM":result="Southwest"
    case "ME","MA","NH","NY":result="Northeast"
    case "FL","NC","GA","SC":result="Southeast"
    default: result="Rest of Country"
};
return result;

Expression

The expression is a combination of values, operators and functions that produce a result. The value in the expression can be a literal value or a variable, while the operator defines the operation between values; the function is used to perform an action and return a value.

Values in Formula Expressions

The value specified in an expression can be a literal value or a variable value. Logi JReport formula syntax supports seven data types of value.

• Literal value
  The Literal Value is a value that is used exactly as it is displayed. A literal value represents a value such as a Number, String, or Date. For example, "Name", 98.6...
• Variables
  A variable is a named storage unit used to store a value. The identifier (name) of variable can be used to refer to the value of the variable or refer to the storage space of the variable. In an expression, the identifier is used to refer to the value, and in assignment statement, the identifier on the left is used to refer to the storage space.
  • Undeclared variables
    The undeclared variables include parameter, DBField, special field and summary defined in the catalog. They can be used as a variable in a formula.
  • Declared variables
    Another type of variable which must be declared in a declare statement before use. The declared variable is a real variable and can be assigned in the assignment statement. There are two kinds of declared variables:
    • Local Variable: Variable which is only valid in the formula where it is declared.
    • Global Variable: Variable which is valid in all the formulas once it is declared. Global variables can only be used by page reports.

Value Data Types

The following table lists the date types Logi JReport formula syntax supports.

Report Level Global Variable

To control the formula more flexibly, Logi JReport offers you one more global variable scope to operate besides component level global variable. That is report level global variable. You can use "report" as the keyword to define the global variable in a formula. Report level variables are only available to page reports.

For the two levels of global variable, the following definitions will help you distinguish them:

• Component level: Its lifetime is the same as the component's lifetime. In its lifetime, whenever a formula is executed, the variable will be executed if it is used in the formula.
• Report level: Its lifetime is the same as the report's (primary report) lifetime. Even in different components (using same data source), the same report level global variable will have only one instance. The report level variable can be passed to different components (using same data source). The components include banded objects, tables, charts, tabulars, crosstabs, and subreports (including many layers of subreports).

When using the keyword "global" to define a global variable in a formula, if you add no words before the keyword, the global variable is on the component level; if you add "report" before the keyword, the global variable will be a report level global variable.

The following example uses the report global variable to do a calculation in the report. First, create three formulas based on the report global variable as follows:

• Formula1: report global number a =0;
• Formula2: a = a+1;
• Formula3: return a;

Then use them in one report including two banded objects (Banded Object 1 and Banded Object 2) using the same dataset as follows:

1. Insert Formula1, Formula2, Formula3 to the Banded Object 1 (15 records) as follows:

   Banded Header: Formula1

   Detail Panel: Formula2

   Banded Footer: Formula3 - returns 15.

2. Then insert Formula2 and Formula3 to the Banded Object 2 (25 records) as follows:

   Detail Panel: Formula2

   Banded Footer: Formula3 - returns 40.

Previous Topic Next Topic