Skip to main content

Format Line Dialog (for Page Report)

  • Updated

Previous Topic  Next Topic

Format Line Dialog (for Page Report)

The Format Line dialog for page report appears when you double-click a line in a chart in a page report, or right-click it and select Format Line from the shortcut menu. It helps you to format the selected chart line in the chart, and consists of the following tabs:

OK

Applies the changes and closes the dialog.

Cancel

Does not retain any changes and closes the dialog.

Apply

Applies all changes and leaves the dialog open.

Help

Displays the help document about this feature.

General

Specifies the general format of the line chart. The options on the tab vary for 2-D line charts and 3-D line charts.

For 2-D lines

See the tab.

Layout

Specifies the layout of the 2-D lines in the chart.

  • None
    If selected, the lines will display trend over categories.
  • Stacked
    If selected, the stacked lines will display the trend of the contribution of each data value over categories.
  • 100% Stacked
    If selected, the 100% stacked lines will display the trend of the percentage each data value contributes over categories.

Depth

Specifies the depth properties for lines of the chart.

  • Use Depth
    Specifies whether to make the lines in the chart three-dimensional. You can also use a formula to control the property.
    • Depth
      Specifies the depth of the lines, in pixels.
    • Direction
      Specifies the direction for depth of the lines, in degrees.

Ignore Null Value

Specifies whether to ignore null data values when drawing lines in the chart. If checked, when a null data value appears on a line, it is ignored and the line is drawn from the previous data value to the next data value directly, otherwise, the line is broken at the point of the null data value.

Smoothed Line

Specifies whether to draw the lines smoothly without the sharp joints.

For 3-D lines

See the tab.

Thickness

Specifies the thickness of the 3-D lines in the chart, in pixels.

Ignore Null Value

Specifies whether to ignore null data values when drawing lines in the chart. If checked, when a null data value appears on a line, it is ignored and the line is drawn from the previous data value to the next data value directly, otherwise, the line is broken at the point of the null data value.

Fill

Specifies the fill properties of the chart lines. See the tab.

Use Single Color

If checked, the lines will use the single color pattern.

  • Fill
    Specifies the fill effect of the chart lines. Disabled when the option Apply Color to Line in the Node tab is checked.
    • Color
      Specifies the color schema for the selected chart line. To edit the color, select the color image and select a color from the color palette or input the hexadecimal value (for example, 0xff0000) of a color directly in the text box.
    • Transparency
      Specifies the transparency of the color schema for the selected chart line.
    • Pattern List
      Opens the Color List dialog to modify color pattern for each line.
  • Area
    Specifies properties for the areas which are formed by the chart axes and the lines. Applies to 2-D lines only.
    • Color
      Specifies the color schema for the selected chart line area.
    • Transparency
      Specifies the transparency of the color schema for the selected chart line area.
    • Area Pattern List
      Opens the Color List dialog to modify color pattern of the areas.
  • Line
    Specifies the pattern of the chart lines.
    • Line Style
      Specifies the style of the selected chart line.
    • Thickness
      Specifies the thickness of the selected chart line, in pixels.
    • Line Pattern List
      Opens the Line Pattern List dialog to modify pattern of the lines in the same data series respectively.

Use Single Color with Condition

If checked, each line can have its single color pattern based on defined conditions. You can select the Advanced or Normal button to switch between the two editing modes to edit the conditions.

  • Normal
    • Select Field
      Lists all the available fields to which the conditional fill can be applied. Select the field on which you want to define the conditions from the drop-down list.
    • Values
      Specifies the value of the condition. Available when you select a category or series field or a field whose return value is not a number from the Select Field drop-down list.
    • Start Value
      Specifies the start value of the condition. Available only when you select a value field or a field that returns a number from the Select Field drop-down list.
    • End Value
      Specifies the end value of the condition. Available only when you select a value field or a field that returns a number from the Select Field drop-down list.
    • Color
      Specifies the color that will be applied to the values which meet the condition. Disabled when the option Apply Color to Line in the Node tab is checked.
    • Transparency
      Specifies the transparency for the color of the condition. Disabled when the option Apply Color to Line in the Node tab is checked.
    • Style
      Specifies the line style of the condition.
    • Add button
      Adds a new condition.
    • Edit button
      Opens the Edit Line Style dialog to edit the line properties for the selected condition.
    • Remove button
      Removes the selected user-defined condition.
    • Value
      Specifies to display data in the condition expression as value. Available only when you select a value field or a field that returns a number from the Select Field drop-down list.
    • Percent
      Specifies to display data in the condition expression in percent. Available only when you select a value field or a field that returns a number from the Select Field drop-down list and takes effect only on 100% Stacked Line 2-D chart.
  • Advanced
    • Condition
      Displays the condition you have defined in the Edit Condition dialog.
    • Color
      Specifies the color that will be applied to the values which meet the condition. Disabled when the option Apply Color to Line in the Node tab is checked.
    • Transparency
      Specifies the transparency for the color of the condition. Disabled when the option Apply Color to Line in the Node tab is checked.
    • Style
      Specifies the line style of the condition.
    • Add button
      Opens the Edit Conditions dialog to create a condition and define the line properties of the condition.
    • Edit button
      When a user-defined condition is selected, selecting the button opens the Edit Conditions dialog to edit the condition and its line properties. When the default condition is selected, it opens the Edit Line Style dialog for editing the line properties of the condition.
    • Remove button
      Removes the selected user-define condition.

Use Multiple Colors with Condition

Not supported on line chart.

Sample

Displays a preview sample of your settings.

Node

Specifies properties for nodes of the 2-D line chart. See the tab.

Use Single Color

If checked, the line nodes will use the single color pattern.

  • Shape
    Specifies the shape properties of the nodes in the selected chart line.
    • Style
      Specifies the style of the nodes in the selected chart line.
    • Transparency
      Specifies the transparency of the nodes in the selected chart line.
    • Width
      Specifies the width of the nodes in the selected chart line, in pixels.
    • Height
      Specifies the height of the nodes in the selected chart line, in pixels.
    • Show Node
      Specifies whether to show nodes in the selected chart line. Only when it is set to true, the node related properties for the line chart can take effect. However, it does not control the properties Show High Point and Show Low Point and the Color property for each.
      • Color
        Specifies the color of the nodes in the selected chart line.
    • Show High Point
      Specifies whether to show the line node in the highest point in the selected chart line.
      • Color
        Specifies the color of the node in the highest point in the selected chart line.
    • Show Low Point
      Specifies whether to show the line node in the lowest point in the selected chart line.
      • Color
        Specifies the color of the node in the lowest point in the selected chart line.
    • Show Highlight Point
      Specifies whether to show the highlight point when you hover the mouse over a node in the selected chart line.
      • Color
        Specifies the color of the highlight point in the selected chart line.
  • Border
    Specifies the border properties of the nodes in the selected chart line. Available when the node is not of the plus, multiplication, star1 or star2 style.
    • Border Color
      Specifies the color for the border of the nodes in the selected chart line.
    • Transparency
      Specifies the transparency for the border of the nodes in the selected chart line.
    • Line Style
      Specifies the line style for the border of the nodes in the selected chart line.
    • Thickness
      Specifies the thickness for the border of the nodes in the selected chart line, in pixels.
  • Line
    Specifies the line properties of the nodes in the selected chart line. Available when the node is of the plus, multiplication, star1 or star2 style.
    • Line Style
      Specifies the line style of the nodes in the selected chart line.
    • Thickness
      Specifies the line thickness of the nodes in the selected chart line.

  • Formula button
    Indicates the value of an option can be controlled by a formula.

  • Node Pattern List
    Opens the Node Pattern List dialog to modify the node pattern for each chart line.

Use Single Color with Condition

If checked, each node can have its single color pattern based on defined conditions. You can select the Advanced or Normal button to switch between the two editing modes to edit the conditions.

  • Normal
    • Select Field
      Lists all the available fields to which the conditional fill can be applied. Select the field on which you want to define the conditions from the drop-down list.
    • Values
      Specifies the value of the condition. Available when you select a category or series field or a field whose return value is not a number from the Select Field drop-down list.
    • Start Value
      Specifies the start value of the condition. Available only when you select a value field or a field that returns a number from the Select Field drop-down list.
    • End Value
      Specifies the end value of the condition. Available only when you select a value field or a field that returns a number from the Select Field drop-down list.
    • Color
      Specifies the color that will be applied to the values which meet the condition.
    • Transparency
      Specifies the transparency for the color of the condition.
    • Style
      Specifies the node style of the condition.
    • Add button
      Adds a new condition line.
    • Edit button
      Opens the Edit Node Style dialog to edit the node properties for the selected condition.
    • Remove button
      Removes the selected user-defined condition.
    • Label
      If checked, you can modify the condition expression of the selected condition line which will be shown as the legend entry label.
    • Value
      Specifies to display data in the condition expression as value. Available only when you select a value field or a field that returns a number from the Select Field drop-down list.
    • Percent
      Specifies to display data in the condition expression in percent. Available only when you select a value field or a field that returns a number from the Select Field drop-down list and takes effect only on 100% Stacked Line 2-D chart.
  • Advanced
    • Condition
      Displays the condition you have defined in the Edit Condition dialog.
    • Color
      Specifies the color that will be applied to the values which meet the condition.
    • Transparency
      Specifies the transparency for the color of the condition.
    • Style
      Specifies the node style of the condition.
    • Add button
      Opens the Edit Conditions dialog to create a condition and define the node properties of the condition.
    • Edit button
      When a user-defined condition is selected, selecting the button opens the Edit Conditions dialog to edit the condition and its node properties. When the default condition is selected, it opens the Edit Node Style dialog for editing node properties of the condition.
    • Remove button
      Removes the selected user-defined condition.

Use Multiple Colors with Condition

Not supported on line chart.

Apply Color to Line

Specifies whether to make the color pattern specified on the node apply to the corresponding line.

Sample

Displays a preview sample of your selection.

Border

Specifies properties for borders of the 3-D lines, which take effect only when the Border property on chart paper is set to true in the Report Inspector. See the tab.

Border Type

Displays the type for border of the lines. The default value is solid, and cannot be changed.

Color

Specifies the color for border of the lines.

Transparency

Specifies the transparency for the color of the border.

Line Style

Specifies the line style to apply to border of lines.

Thickness

Specifies the thickness for the border, in pixels.

End Caps

Specifies the ending style of the border line.

  • butt
    Ends unclosed sub paths and dash segments with no added decoration.
  • round
    Ends unclosed sub paths and dash segments with a round decoration that has a radius equal to half of the width of the pen.
  • square
    Ends unclosed sub paths and dash segments with a square projection that extends beyond the end of the segment to a distance equal to half of the line width.

Line Joint

Specifies the line joint style for the border line.

  • miter
    Joins path segments by extending their outside edges until they meet.
  • round
    Joins path segments by rounding off the corner at a radius of half the line width.
  • bevel
    Joins path segments by connecting the outer corners of their wide outlines with a straight segment.

Sample

Displays a preview sample of your selection.

Path

Specifies the fill pattern of the border line.

  • Outline Path
    Specifies the fill pattern of the border line to be outline path.
  • Fill Path
    Specifies the fill pattern of the border line to be whole path.

Dash

Specifies the dash size of border line.

  • Auto Adjusted Dash
    If selected, the dash size will be adjusted automatically.
  • Fixed Dash Size
    If selected, the dash size will be fixed size.

Data Label

Specifies properties for data labels displayed on the lines. See the tab.

Static Data Label

Specifies properties of the static data labels on the lines. Not supported on 3-D line charts.

  • Show Static Data Label
    Specifies whether or not to show the static data labels on the lines. Only when it is checked can the following static data label related properties take effect.
  • Position
    Specifies the position of the static data labels on the lines.
    • auto fit
      If selected, the static data labels will be displayed automatically.
    • top center
      If selected, the static data labels will be displayed on the top center of the line nodes.
    • top left
      If selected, the static data labels will be displayed on the top left of the line nodes.
    • top right
      If selected, the static data labels will be displayed on the top right of the line nodes.
    • bottom left
      If selected, the static data labels will be displayed at the bottom left of the line nodes.
    • bottom center
      If selected, the static data labels will be displayed at the bottom center of the line nodes.
    • bottom right
      If selected, the static data labels will be displayed at the bottom right of the line nodes.
  • Suppress Label When 0
    If true, the static data label whose value is 0 will not be displayed on the chart.

Font

Specifies the font format of text in the data labels.

  • Font list
    Lists all the available font faces that can be selected to apply to the text.
  • Font Size
    Specifies the font size of the text.
  • Font Color
    Specifies the font color of the text.
  • Transparency
    Specifies the transparency of the text.
  • Rotation
    Specifies the rotation angle of the text around its center, in degrees. The default value is 0.
  • Shearing
    Specifies the gradient of the text.

Effects

Specifies the special effects of text in the data labels.

  • Style
    Specifies the font style of the text. It can be one of the following: plain, bold, italic, and bold italic.
  • Strikethrough
    Specifies the style of the horizontal line with which the text is struck through. It can be one of the following: none, thin line, bold line, and double lines.
  • Underline
    Specifies the style of the horizontal line under the text. It can be one of the following: none, single, single lower, bold line, bold lower, double lines, bold double, patterned line, and bold patterned.
  • Superscript
    Raises the text above the baseline and changes the text to a smaller font size, if a smaller size is available.
  • Embossed
    Makes the text appear to be raised off the page in relief.
  • Outlined
    Displays the inner and outer borders of each character.
  • Subscript
    Lowers the text below the baseline and changes the text to a smaller font size, if a smaller size is available.
  • Engraved
    Makes the text appear to be imprinted or pressed into the page.
  • Shadowed
    Adds a shadow beneath and to the right of the text.

Previous Topic  Next Topic