Data Format Dialog Box

You can use the Data Format dialog box to specify the data format of the values in a chart. This topic describes the options in the dialog box.

Designer displays the Data Format dialog box when you select the ellipsis Ellipsis button to specify the data format for objects in a chart in the Report Inspector, and provides you with different options in the dialog box according to the different objects in the chart for which you specify to set the format.

When you use the Data Format dialog box to specify the data format for objects except the category axis (the X axis) in a chart, you see the following options in the dialog box:

Data Format dialog box

Category & Format

The two boxes list the category types and the formats of each category that Designer provides by default. Select a category and a format for this category, then select Add to add it as the format of the category. You can add only one format for each category.

Category	Format	Description (Sample)
Scale		Divides the value by hundreds, thousands, and so on.
	Logarithm	Calculates ten to the power of the value.
	Hundreds	Divides the value by one hundred.
	Thousands	Divides the value by one thousand.
	Millions	Divides the value by one million.
	Billions	Divides the value by one billion.
	Trillions	Divides the value by one trillion.
Number		Re-formats the number value (original example: 123456)
	0	Formats a decimal number to an integer (123456).
	#,##0	Formats a decimal number to a digit grouped integer (123,456).
	#,##0;-#,##0	Formats a decimal number to a digit grouped integer. A minus sign is used as the negative prefix (123,456/-123,456).
	0.00	Formats a decimal number to a fixed-point number retaining 2 digits after decimal separator (123456.00).
	#,##0.00	Formats a decimal number to a digit grouped number retaining 2 digits after decimal separator (123,456.00).
	#,##0.00;-#,##0.00	Formats a decimal number to a digit grouped number retaining 2 digits after decimal separator. A minus sign is used as the negative prefix (123,456.00/-123,456.00).
	0.00E00	Formats a decimal number to a number in scientific notation. The mantissa is often in the range 1.0 <= x < 10.0, and the number of digit characters after the exponent character (E) gives the minimum exponent digit count (1.23E04).
	##0.0E0	Formats a decimal number to a number in scientific notation. The minimum number of integer in the mantissa is 1, and the number of digit characters after the exponent character (E) gives the minimum exponent digit count (12.34E3).
	$0	Format a decimal number to an integer, prefixed with the currency symbol "$" ($123456).
	$#,##0	Formats a decimal number to a digit grouped integer, prefixed with the currency symbol "$" ($123,456).
	$#,##0;-$#,##0	Formats a decimal number to a digit grouped integer, prefixed with the currency symbol "$". A minus sign is used as the negative prefix ($123,456/-$123,456).
	$0.00	Formats a decimal number to a fixed-point number retaining 2 digits after decimal separator, prefixed with the currency symbol "$" ($123456.00).
	$#,##0.00	Formats a decimal number to a digit grouped number retaining 2 digits after decimal separator, prefixed with the currency symbol "$" ($123,456.00).
	$#,##0.00; -$#,##0.00	Formats a decimal number to a digit grouped number retaining 2 digits after decimal separator, prefixed with the currency symbol "$". A minus sign is used as the negative prefix ($123,456.00/-$123,456.00).
	$0.00E00	Formats a decimal number to a number in scientific notation, prefixed with the currency symbol "$". The mantissa is often in the range 1.0 <= x < 10.0, and the number of digit characters after the exponent character (E) gives the minimum exponent digit count ($1.23E$04).
	$##0.0E0	Formats a decimal number to a number in scientific notation, prefixed with the currency symbol "$". The minimum number of integer in the mantissa is 1, and the number of digit characters after the exponent character (E) gives the minimum exponent digit count ($12.34E$3).
	0%	Formats a decimal number to percentage: multiplied by 100 and shown as an integer percentage (12%).
	0.00%	Formats a decimal number to percentage: multiplied by 100 and shown as a fixed-point number percentage retaining 2 digits after decimal separator (12.34%).
	The number of 0 that appears in a pattern indicates the minimum digits, show 0 if that digit is zero. The number of # that appears after the decimal point in a pattern indicates the maximum digits of decimal, zero shows as absent. Use a single quotation mark to quote special characters in a prefix or suffix, for example, '#'# formats 123 to #123. To create the single quote itself, use two in a row: # o''clock.
Date/Time		Re-formats the date/time value (for example, Wednesday, December 25, 00:00:00 GMT-08:00 2002)
	G	Formats a date to era designator (AD).
	yyyy	Formats a date to year (2002).
	yy	Formats a date to year in short form (02).
	yyyy G	Formats a date to year, tagged with era designator (2002 AD)
	MM	Formats a date to month in year, shown in number format (12).
	MMM	Formats a date to month in year, shown in the abbreviated form (Dec).
	MMMMMMMM	Formats a date to month in year, shown in the full form (December).
	dd/MM/yy	Formats a date to a simple date form (25/12/02).
	dd-MMM-yy	Formats a date to a simple date form (25-Dec-02).
	dd-MMM	Formats a date to a simple date form (25-Dec).
	MMM-yy	Formats a date to a simple date form (Dec-02).
	MMM yyyy	Formats a date to a simple date form (Dec 2002).
	dd	Formats a date to day in month (25).
	DDD	Formats a date to day in year (359).
	ww	Formats a date to week in year (52).
	W	Formats a date to week in month (4).
	EEE	Formats a date to day in week, in short form (Wed).
	EEEEEE	Formats a date to day in week (Wednesday).
	HH	Formats a date to hour in day, 0~23 (00).
	kk	Formats a date to hour in day, 1~24 (24).
	KK a	Formats a date to hour in am/pm, 0~11, with am/pm marker (00 AM)
	hh a	Formats a date to hour in am/pm, 1~12, with am/pm marker (12 AM)
	mm	Formats a date to minute in hour (00).
	hh:mm a	Formats a date to hour in am/pm, 1~12, minutes in an hour, with am/pm marker (12:00 AM).
	ss	Formats a date to second in minute (00).
	hh:mm:ss	Formats a date to hour in am/pm 1~12, minutes in an hour, and second in minute (12:00:00).
	hh:mm:ss a	Formats a date to hour in am/pm 1~12, minutes in an hour, and second in minute, with am/pm marker (12:00:00 AM).
	mm:ss	Formats a date to minute in hour and second in minute (00:00).
	MMMMM dd yyyy G (EEEEEE) hh:mm:ss aa z	Formats a date to a full form date, which contains month in year (shown in full form), days in a month, year, era designator, day in week (shown in the full form), hour in a day, 1~12, minutes in an hour, second in minute, am/pm marker, and time zone (December 25 2002 AD (Wednesday) 12:00:00 AM GMT-08:00).
	Designer treats any characters in the pattern that are not in the ranges of ['a'..'z'] and ['A'..'Z'] as quoted text. For instance, characters such as ':', '.', ' ', '#', and '@' appear in the resulting time text even they are not embraced within single quotes. You cannot add a pattern containing any invalid pattern letter to the filter stack.
Text		Specifies the length of the value.
	Default Length	Uses the length of the string Default Length, which is 14, as the length of the string. Designer cuts any letters that exceed this length. You can modify this string, adding or deleting letters to increase or decrease the length limit. For example, type "Teddy", the label may probably be "Wed D", which originally could be "Wed December 25 2002". If you want to show all, you can type "Teddy is a lovely bear!", where the length is longer than the length of the string "Wed December 25 2002".
Mapping		Maps new value to one or more values.
	One-to-one Mapping	Maps a new value to one value. Type the argument number that you want to replace, and then specify the new value in the Map To box. For example, if you want to replace the second data label on the X axis, which is "Thu Jul 04 2002", with a new string "US National Day", just type 2 in the Argument# box, type US National Day in the Map To box, and then select Add to add it to the Stack box. If you want to map more values, repeat this procedure.
	Range Mapping	Maps a new value to a range of values. Type the argument numbers to define the range you want to map together, and then specify the new value in the Map To box. For example, if you want to replace the data labels from the second one to the fifth with a new name "My Holiday", just type 2 in the first Argument# box and 5 in the second Argument# box, then type My Holiday in the Map To box, and finally select Add to add it to the Stack box. If you want to map ranges that are not consecutive, repeat this procedure.
	Text Mapping	Changes the data in the axis data label to a customized string. For example, if you want to change "Chen" in the first data label of the X axis to "Logi Analytics", type Chen in the Original Text box, type Logi Analytics in the Map To box, and then select Add to add it to the Stack box. You can only change the data one by one. Make sure that your spelling in the Original Text box is exactly the same as the data shown in the axis label.
	Prefix	Adds a string before the text in the data label of the axis. For example, if you want to add "NA" before the text in the data label of the X axis, type NA in the Map To box, and select Add to add it to the Stack box.
	Suffix	Adds a string behind the text in the data label of the axis. For example, if you want to add "NA" behind the text in the data label of the X axis, type NA in the Map To box, and select Add to add it to the Stack box.
	The data labels along each axis count from 0, which means the number of the first data label you see on the axis is 0, the second is 1, the third is 2, and so on.

Properties

This text box shows properties of the format that you select in the Format box. If the default formats Designer provides for a category cannot meet your requirement, you can define your own format in the text box and select Add to add it as the format of the category.

Auto Scale in Number

Specify whether to automatically scale the values of the Number data type that fall into the two ranges:

When 1000 <= value < 10^15, Logi Report Engine applies the following quantity unit symbols of the International System of Units to scale the values: K (10^3), M (10^6), G (10^9), and T (10^12).
When 0 < value < 0.001 or value >= 10^15, Logi Report Engine uses scientific notation to scale the values.

By default, Designer selects "auto" for the option, meaning, Designer applies the setting that you specify for the same property on the chart in the Report Inspector for the values. If you select "true", Designer applies the specified format to the integer part of the values after scaling them; however, if the specified format conflicts with the logic of Auto Scale in Number, for example, the values display in percentage, Designer ignores the Auto Scale in Number setting. Select "false" if you do not want to scale the values.

Sample

This box displays a sample for the selected format.

Stack

This box lists all the formats that you select from different categories.

Add

Select to add a format to the Stack box.

Remove

Select to remove the specified format from the Stack box.

Apply

Select to apply the specified format to the object.

Select to apply your settings and close the dialog box.

Cancel

Select to close the dialog box without saving any changes.

Help

Select to view information about the dialog box.

When you use the Data Format dialog box to specify the data format for the category axis (the X axis) in a chart, you see the following tabs in the dialog box (to open the dialog box, locate Chart Object in the Report Inspector, select the ellipsis Ellipsis button beside the value text box of the Category Format property in the Data group):

Major Label Tab
Minor Label Tab

You see these buttons in the tabs:

Select to apply your settings and close the dialog box.

Cancel

Select to close the dialog box without saving any changes.

Help

Select to view information about the dialog box.

Major Label Tab

Use this tab to specify the data format of the major tick mark labels on the axis.

Data Format dialog box - Major Label tab

Category & Format

These two boxes list the category types and the formats of each category that Designer provides by default. Select a category and a format for this category, then select Add to add it as the format of the category. You can add only one format for each category.

Properties

This text box shows the properties of the format that you select in the Format box. If the default formats Designer provides for a category cannot meet your requirement, you can define your own format in the text box and select Add to add it as the format of the category.

Auto Scale in Number

Specify whether to automatically scale the Number values that fall into the two ranges:

When 1000 <= value < 10^15, Logi Report Engine applies the following quantity unit symbols of the International System of Units to scale the values: K (10^3), M (10^6), G (10^9), and T (10^12).
When 0 < value < 0.001 or value >= 10^15, Logi Report Engine uses scientific notation to scale the values.

Sample

This box displays a sample for the selected format.

Stack

This box lists all the formats that you select from different categories.

Add

Select to add a format to the Stack box.

Remove

Select to remove the specified format from the Stack box.

Apply

Select to apply the specified format to the major tick mark labels.

Truncate

Select to truncate the label text that is longer than 10 characters and only show the first 7 characters.

Minor Label Tab

Use this tab to specify the data format of the minor tick mark labels on the axis.

Data Format dialog box - Minor Label tab

Correlate with Major Label

Select to apply the data format that you specify for the major tick mark labels to the minor tick mark labels. Clear it if you want to apply separate data format for the minor tick mark labels.

Category & Format

Properties

Auto Scale in Number

Specify whether to automatically scale the Number values that fall into the two ranges:

When 1000 <= value < 10^15, Logi Report Engine applies the following quantity unit symbols of the International System of Units to scale the values: K (10^3), M (10^6), G (10^9), and T (10^12).
When 0 < value < 0.001 or value >= 10^15, Logi Report Engine uses scientific notation to scale the values.

Sample

This box displays a sample for the selected format.

Stack

This box lists all the formats that you select from different categories.

Add

Select to add a format to the Stack box.

Remove

Select to remove the specified format from the Stack box.

Apply

Select to apply the specified format to the minor tick mark labels.

Previous Topic Next Topic

Data Format Dialog Box

Major Label Tab

Minor Label Tab

Recently viewed articles

Related articles